SEf150's latest activity

  • S
    SEf150 reacted to Raceranger97's post in the thread V8 Solid Axle Ranger with Like Like.
    Looking more likely after tonight’s push. Took the Transmission in to swap the output shaft to match the Atlas. Trans ended up being...
  • S
    SEf150 replied to the thread 78 K10 with a 6.0L twist.
    Might as well! I did the same thing in an old k5 on a trail in bfe alaska. Ditching the sway bar up front will help the ride a little...
  • S
    SEf150 reacted to Hansoloo's post in the thread 78 K10 with a 6.0L twist with Like Like.
    Oh and this happened lol Checked all the lugnuts with the wheel in the air before this and they were tight must’ve been over tightened...
  • S
    SEf150 reacted to Stevesie's post in the thread 1985 4Riggity - The Skin Flute with Like Like.
    It was one hell of an undertaking. Basically got it running and driving again and lost steam finishing up all the loose ends. It has a...
  • S
    SEf150 reacted to Hansoloo's post in the thread 78 K10 with a 6.0L twist with Like Like.
    for future reference for others: you will need to switch over to a 3/4 ton spindle instead of your stock 1/2 ton spindle on pre 1973...
  • S
    SEf150 reacted to troysladeck's post in the thread Pearl, the 93' Explorer with Like Like.
    New Years trip to Gordons Well The new Deavers were definitely noticeable and the rear end felt great. The trunk mount worked as...
  • S
    SEf150 replied to the thread 78 K10 with a 6.0L twist.
    https://ck5.com/forums/resources/6-lug-to-8-lug-conversion.22/
  • S
    SEf150 replied to the thread 78 K10 with a 6.0L twist.
    https://www.partsgeek.com/kcscmsk-chevrolet-k20-brake-rotor-and-hub-assembly.html?utm_source=google&utm_medium=ff&utm_content=DN&utm_camp...
  • S
    SEf150 replied to the thread 78 K10 with a 6.0L twist.
    8 lug is just a hub/rotor swap. I ran a d44 for a couple years in my k5 on old military surplus 37's. It worked but a dodge 60 was...
  • S
    SEf150 replied to the thread 78 K10 with a 6.0L twist.
    Are you going to be crawling with the truck? The current front axle can be swapped over to 8 lug easily to match the lug pattern of a...
  • S
    SEf150 reacted to FlyByRacing's post in the thread Class 2000 ranger with Like Like.
    It's all painted. Turned out pretty ok. Now on to trying to get it dialed in and buy everything else I need in an attempt to make the...
  • S
    SEf150 reacted to Raceranger97's post in the thread To The Moon build with Like Like.
    Finally testing out the new clutch. Works nice. Was surprised this jump wasn’t using all of the bump, may open the tubes a bit more.
  • S
    SEf150 reacted to turbomonty's post in the thread 02 Montery Dakar build / final stages with Like Like.
    so, i have in my trans controller to shift up for me at what ever rpm i like. i do about 5500 as the rpm will sling up past this pretty...
  • S
    SEf150 reacted to FlyByRacing's post in the thread Class 2000 ranger with Like Like.
    Got tired of everything not matching. Figured a garage built truck needed a driveway rattle can paint job. I'll finish the front clip...
  • S
    SEf150 reacted to WW_RANGER_X's post in the thread WASTED WAGES 89 DODGE W150 with Like Like.
    Here’s a couple of pics with the new setup. I dig it! I may see if E could convert this over to a build thread. Lots of work to do...
Show older items
Back
Top