RMC's latest activity
-
Springs: 22”x400lb 8”x350lb -
RMC replied to the thread Rear End Full Floater Hubs? Options and Opinions.Here’s some pics to explain the contrast I described above in last comment. First is front hubs used as rear, with drive pucks and is...
-
-
RMC replied to the thread Thoughts on Jamar hubs?.For those who don’t know this dude( Philo ) is smart as a whip with ecm shit and configs, wiring and mechanical. Very solid rep.
-
RMC replied to the thread Thoughts on Jamar hubs?.Chris Philo!! Been a while glad to see you are here. 👏🏻
-
RMC replied to the thread Rear End Full Floater Hubs? Options and Opinions.You want the cheap route or the expensive route. I can advise both. Cheap route solid axle industries 5 on 5.5 rear hubs, snouts and...
-
RMC replied to the thread Leadfoot Grey 95 Bronco.Heads I’d suggest I.G. Diego in riverside, good prices for from what I’ve been told, good prices for engine work and cylinder work. If...
-
I have one from the time I swapped gears into the current housing but that was very minimal work compared to the whole swapping gears...
-
RMC replied to the thread Anybody have tips for regearing?.You’ll need a mag base a plunge indicator to check backlash. You can get a cheap one on Amazon it should due. I advise .0005 accuracy...
-
-
Work station for the rear not ideal or organized but gotta make it work using whatever the bronco has for tools to do the change
-
RMC replied to the thread Bumper light bar.Sold!
-
RMC replied to the thread Finally…94 Bronco build.I used to have to use minima photo shrinker on other forums. Let me know if it was my pictures I’ll maxi, mod or mini them.
-
RMC replied to the thread Finally…94 Bronco build.Appreciated man.
-
Robert, Thanks, I have a set of your knuckles and brake kit from a few years back. Finally looking forward to using them. I will hit...
-
RMC replied to the thread Bumper light bar.Very possible. I ask my neighbor if I can check the radius on his bumper. Most bumpers are pretty close in arc. I can confirm if you...
-
RMC replied to the thread Finally…94 Bronco build.Let me know if and when to get started on a knuckle set for it. Making sets 100% conventionally at this time like the first 10 sets...
