LPR_Bronco's latest activity
-
LThese two make a good looking pair!
-
LGot the inner fenders all sealed up and painted Pulled it out of the barn today and washed it. And then painted it.
-
LLPR_Bronco reacted to Lostweekend's post in the thread Sold 1993 Bronco Sleeper Long travel with
Like.
1993 Ford Bronco BLGT exclusive $20,000 Very fun car with tons of work done to it. Only about 500 miles on current build and tires. 35”... -
L2003-06 ford excursion. Trim front tab off and angle against dash. Then trimmed along the floor between the seats. Doesn't fit flush...
-
Lso after 3000 miles. I finally serviced the fork and rear shock.. by installing DVO Onyx D1 180mm Fork and a DVO Topaz 3 rear shock...
-
LI went ahead and tossed the core support and fenders on. Then threw a tire on for fun I love the sleeper concept 🤘🏻 But big...
-
LLPR_Bronco reacted to Tahoe_Prerunner's post in the thread 2008 Chevy Tahoe Prerunner/Prelander Build with Like.
Update on the build: -Top of cage and rockers tube are full welded and pillars are ready to be tacked. -Stepped up to monster 40”...
-
LPainted the swingers A close up of how I worked around the break booster and MC. I used a MC out of an explorer with the same...
-
LAfter the steering was more or less figured out, it was on to the steering equipment, I was shooting for a 1500psi 4.5 gpm tc pump...
-
LThank you! It was certainly a learning process, a buddy of mine had built a similar swing steer so I copied his design a bit, I got...
-
LBuilt some shock mounts on the beam, I didn’t truss the beam up, but I will reinforce when I pull the beams to final weld and prep...
-
LIt was gonna be a two weekend install on the Solo cage…. Then I decided to push the cage to the front and set it up for a 14” coil and...
-
LHi! This will be the build thread for my 1987 Bronco. I started a thread on go fast broncos but it seems like everyone is over here...
-
LI was finally able to get this on the hoist Did some exhaust work And started closing off the inner fenders Also got the front...
-
LI figure at some point ill link it or go spring under. <waiting on that lotto to hit> Just going to enjoy what I already put the work...