Klever's latest activity
-
Had a great shakedown run on the previous Saturday. Had some issues with a flat tire on a trailer on the way out but made it there... -
Well, its March which means i make my annual OFF-ROAD EXPO thread lol. Back at the OC Fairgrounds in Costa Mesa. Some may think it's too...
-
As mentioned by the_falab, add supports to the wheel opening. I added supports at the wheel openings. 1" tube welded to the body with a...
-
-
Well updates to the Bronco are going to be even slower than what they are now I finally got my own place for my family and it has a...
-
brings is to current day, i work on the truck once every week or so since i work my job full time and little by little chipping away at...
-
built some abs plastic cover ups for the dashboard. ordered my rear axle. got the BMS 55 inch links, Mazulla front hubs and Jamar rear...
-
heres what i did for a front bumper/core support mount. very happy since it came so close to the grille, tucked up nice which is exactly...
-
frame horns cut off placed an order for 4 coilovers. 2.5x10 and 2.5x16 bypasses 3.0x10 and 3.5x18 4 bump stops. 2.0s up front and 2.5s...
-
welded the lower tubes to the frame inside the frame. then plated it in in the C channel (forgot to take photos lol) plated the 2 tubes...
-
This is where i decided i wanted to link the truck instead of leaf springs. and really realized i should have just bought a stock truck...
-
So welded on the mazulla front shock towers and forgot to take photos smh. welded on front frame plates. then i bought the TE designs...
-
finished the cage, built cab tie ins and floor close plates, stitch welded all of them in, and then silicone sealed the floor plates. i...
-
so in febraury of 2025 is when i put the truck up on jackstands and started to tear into it, luckily had guidance of a few friends who...
-
After a few of my friends that are on here have been convincing me to make a build thread on my truck, i decided to do so, i bought this...
