Klever's latest activity
-
-
Because. Gotta keep the beers safe back there. 😂. It’s a TE Cage. So ask them lol
-
Klever reacted to BlueFireSVT's post in the thread Looking for Friends with Offroad Benefits. with
Like.
How’s it going! I’m Chandler. Looking for some Prerunner peeps to do runs and camp with. Currently building a 97-03 F150 4x4. It’s... -
-
Hey itz_dylan_ford, here’s my 1986 ford bronco I’ve been building over the past five years, solo Motorsports front kit, a TE Designs...
-
-
Klever reacted to Giant Geoff's post in the thread What material/size for upper links are you guys running on 4-links? with Like.
DOM 1.75" x .120" or 2.0" x .120 if your over 5500lbs.
-
Klever reacted to 84Prerunner's post in the thread What material/size for upper links are you guys running on 4-links? with Like.
Mine are 1.75”x.120 DOM, around 40” long but I don’t recommend that 😂 2”x.250 is what we use on a ranger 1400 truck. Taco’d 1.75x.120...
-
Klever reacted to FENDERFAB's post in the thread What material/size for upper links are you guys running on 4-links? with Like.
2" .250 wall DOM on mine.
-
Switched from a 6 button thingy to an 8 button thingy, also put a switch in the dash to give the panel power so I don’t have to have the...
-
Klever reacted to 84Prerunner's post in the thread Rear End Full Floater Hubs? Options and Opinions with Like.
Anything with 40s should have 40spline or larger axles. Not all 35 spline axles are created equal either. With a healthy v8 even on 37s...
-
I learned a few things doing it and now that I have everything working as it should, I’ll share my experience/headache. This is gonna be...
-
We don't have any bleed holes in our piston and run a 6" metering rod that is a tight fit where it closes off the by-passport at the...
-
got some cage to cab plating done and was able to grab a fresh McNeil dash off marketplace, also got a deal on 3rd prp comp elite seat...
-
Another 2.5 coil and bypass set up on stock width beams. With a 4” bump sleeved to 2” I haven’t railed miles of whoops yet but the...
