Hansoloo's latest activity
-
Looking for feedback. last night i tacked up 1/2 of the mounts of the AC condensor located right in front of the radiator. I realized as... -
Went to cycle the suspension with the tire on to plan for oil cooler clearances & discovered that the fender mounts were built...
-
Hansoloo replied to the thread 78 K10 with a 6.0L twist.Still haven’t taken any harder trails yet but got out on some fire roads and this things still going strong
-
-
I Was able to get my hot air intake hung and plumbed
-
For all you SJW’s out there pissed about my boy looking at the babe calender…. I’ll post a picture of him changing the page on my wife’s...
-
Had a very fun little camping trip with the kids last weekend
-
Now I had 4.86 rear gears done, I went out to the more race and truck worked awesome. Now I need to match the front gears. Installed...
-
Ok got rear 3rd all regeared with 4.86 gears. Rpm is much better for all around driving with the 35s. 0 noise. Just drained the...
-
Hansoloo replied to the thread 78 K10 with a 6.0L twist.Immediately after wiring the new dash, sent a 5-6ish hour roadtrip SB-Sequoias. Alternator ground somehow came loose at the very end but...
-
-
Built some shock mounts on the beam, I didn’t truss the beam up, but I will reinforce when I pull the beams to final weld and prep...
-
-
Hansoloo replied to the thread 78 K10 with a 6.0L twist.Finished the rear end swap (SF 14bolt out of a 1500hd), got crossover steering done and all the stuff and things inbetween. New brake...
-
-
pivoting off the radiator mount a little bit & working to get all the front body panels mounted so I can mock up all the front end...
-
Well we are finally back on the ground! Got her pretty buttoned up over the last couple weeks. Still lots to finish up. Got to weld the...
-
Hansoloo reacted to Hambone's post in the thread Not much left Tacoma left... 4500 koh build with
Like.
Well got the front axle back in and wheel studs finally showed up. Having all sorts of issues with the brake kit and calipers not...
