Hansoloo's latest activity
-
Shes a runner. May lower the front a tad. List is getting really short; just have to change out the driveshaft u joint to a 1330, bleed... -
Well I successfully built from scratch the worst type of ttb steering 🤣 I’m beat and my brain is fried. I was hoping stock bronco...
-
Looks awesome. The Right hand beam pivot looks like it would want to bend up/back to the motor. Are you worried about this and gonna...
-
Ran into my first issue with the diff installed. Apparently I welded the back reinforcement plate in the wrong spot. It made sense to me...
-
Got the last little bit of welding finished and everything painted. Ready for final assembly Also got the 3rd member cleaned up. Been...
-
Finished up rear bedside mounts. Added a kicker for the rear corner. These are very solid all bolted up. Threw the new wheels and tires...
-
Hansoloo reacted to Georgetown1stgen's post in the thread Toyota 1st gen longbed "trekker" style conversion project with
Like.
Rear bumper dialed for now, 2x4 layed flat i cut out some end caps then bent 1.5 tubing to run up to the fender well. Two 2x3 1/4" box... -
-
-
Hansoloo reacted to Isaac.Helton's post in the thread Camp Kyle Shit Box Show Down Ranger with Like.
-
Picked up some new radius arms to fix the caster with the lift and move the axle about an inch forward. I didnt take time to get any...
-
Full bump, centered in the wheel well, tire has probably around 6 inches turning radius both directions. I could probably push it...
-
I like having less pre-load and a stiffer spring for sending it.
-
Been having too much fun with this thing lately. Unfortunately the days of the body being relatively straight are gone. I’m on the hunt...
-
Made some progress cutting the floor and clearing the motor. As it sits! Body in place, 118” WB, 40” tire Crazy how much time gets...