Hansoloo's latest activity
-
Had a very fun little camping trip with the kids last weekend -
Now I had 4.86 rear gears done, I went out to the more race and truck worked awesome. Now I need to match the front gears. Installed...
-
Ok got rear 3rd all regeared with 4.86 gears. Rpm is much better for all around driving with the 35s. 0 noise. Just drained the...
-
Hansoloo replied to the thread 78 K10 with a 6.0L twist.Immediately after wiring the new dash, sent a 5-6ish hour roadtrip SB-Sequoias. Alternator ground somehow came loose at the very end but...
-
-
Built some shock mounts on the beam, I didn’t truss the beam up, but I will reinforce when I pull the beams to final weld and prep...
-
-
Hansoloo replied to the thread 78 K10 with a 6.0L twist.Finished the rear end swap (SF 14bolt out of a 1500hd), got crossover steering done and all the stuff and things inbetween. New brake...
-
-
pivoting off the radiator mount a little bit & working to get all the front body panels mounted so I can mock up all the front end...
-
Well we are finally back on the ground! Got her pretty buttoned up over the last couple weeks. Still lots to finish up. Got to weld the...
-
Hansoloo reacted to Hambone's post in the thread Not much left Tacoma left... 4500 koh build with
Like.
Well got the front axle back in and wheel studs finally showed up. Having all sorts of issues with the brake kit and calipers not... -
Hansoloo reacted to Hambone's post in the thread Not much left Tacoma left... 4500 koh build with Like.
Bump pads are in. Panhard is welded. Few more plates for support and front axle will be done. Getting close to turning it around and...
-
Slowly been chipping away on the king pins. Got beams cut and turned and had Jesse and Mikey at the @the_fablab_ machine these sweet...
-
I agree with adding bumps and sticking with the stock bolt - you can get the part number by putting in your vin at partsouq.com and...
-
On the camper side of things I ordered up everything for the solar setup to install this summer. 12V 300Ah battery Controller 4000W...
-
Hansoloo replied to the thread Local Legend The sleeping Taco.no idea whose truck but high desert motorsports had a taco on their ig page with stock width uppers and lowers with hydro bump and ext...
