Hambone's latest activity
-
HHambone replied to the thread Not much left Tacoma left... 4500 koh build.I also worked on the fuel cell and am extremely stoked on how it came out. Drew it all in 2d cad and cut it all correctly the first time...
-
-
HHambone replied to the thread Not much left Tacoma left... 4500 koh build.Got most the passenger compartment cage done minus the intrusion bars and door bars. Pretty happy with it. I ran out of tubing so the...
-
-
HA few more updates.
-
H4Runners been out of commission with a bent front driveshaft that I haven’t had the time to take out and rebend straight, and a BFG...
-
HYeah diving into the front fender looks good. Red or Dead Fabs Toyota pickup is my favorite exoskeleton truck. Clean and simple.
-
HSome snow wheeling action from this weekend.
-
HSome more small details/learning opportunities I’ve encountered throughout my time with the Bronco. Mounted the winch solenoid behind...
-
HHad some friends at the swap meet and was able to score some goodies. Been looking for a set of matching Walkers for my spares forever...
-
HHambone replied to the thread Not much left Tacoma left... 4500 koh build.Only made it outside for an hour or two and got the rest of the x knocked out. Pretty happy. Took measurements to make a file for the...
-
-
HHambone replied to the thread Not much left Tacoma left... 4500 koh build.Then messed with starting on the b pillar x. Was able to salvage the original cross bar I made by adding another 15 degree bend on each...
-
-
HHambone replied to the thread Not much left Tacoma left... 4500 koh build.Redid the seat mounts after a suggestion on irate Alright redid the seat mounts again. Got them a little lower by another inch or so...
-
-
HHambone replied to the thread Not much left Tacoma left... 4500 koh build.Got the driver seat mounts in and adjusted the passenger a little more. Started making the harness bar till the hole saw stripped out on...
-
-
HHave done a bunch things to this lately just making it as reliable as possible! Had a couple CEL on the dash so just started replacing...
-
HHambone reacted to Yotarunner760's post in the thread Toyota pickup build photos (built by JMR race works) with
Like.
No one’s probably even looking down this far 👀 -
HCleaned up like it never happened, except for the driveline. After seeing how much it got into the rocks I’m considering a High Pinion...
