DialedShockPrep's latest activity
-
DialedShockPrep replied to the thread Local Legend Don't Call It An S10.Not exactly the same as the BMS lock rings but a similar approach.. My old Ranger kingpin spindles used a threaded pinch bolt style... -
DialedShockPrep replied to the thread RC Cars?.Traxxas! It’s the TRX4M F150 body, it just so happens that the Little Guy RAcing Products SCX24 chassis and axle set is very very close...
-
DialedShockPrep replied to the thread Trip setups / truck bed setup.Side note, do you live in Fullerton?
-
DialedShockPrep replied to the thread RC Cars?.I guess since I’m here. I’ve got 3 Scx24 based crawlers, only two complete currently. Losi Super Baja Rey 2.0 Traxxas Slash 4x4 Most...
-
-
DialedShockPrep replied to the thread RC Cars?.The best thing I’ve done on mine is a +6mm brass or aluminum axle set, with overdrive front gears and a good steering servo. I have the...
-
DialedShockPrep reacted to 4XForOffroad's post in the thread Setting Ride Height - Dual Rate Coilover with
Like.
I recently had my coilovers rebuilt by @DialedShockPrep a couple months ago and I am putting the truck on its own weight for the first... -
DialedShockPrep replied to the thread Setting Ride Height - Dual Rate Coilover.On main and tender setups, you’ll set ride height with the crossover rings, and then droop the truck out and add 1” preload to the main...
-
DialedShockPrep replied to the thread 2011 3.5 Fraptor.Well that makes things significantly easier than! I’d go that route. I could be wrong but you should be able to run just about anyone’s...
-
DialedShockPrep replied to the thread 2011 3.5 Fraptor.He paid Richer/Cho to do the work. They basically finalized all of the fab and everything and he tore it all apart for final assembly...
-
DialedShockPrep replied to the thread 2011 3.5 Fraptor.Bring the truck over, I’ll do that for you. Realistically, the 09+ F150’s and raptors have some of the worst front ends out there...
-
Oem taillights just hit
-
DialedShockPrep replied to the thread Obs f150 swing steer questions.You have high angle misalignment spacers on the heims at the swingers, get regular bearing reducers with a narrower spread and you’ll be...
-
DialedShockPrep reacted to FasterNU's post in the thread Local Legend Don't Call It An S10 with Like.
yea might be able to narrow the swingers themselves using the rodends where ball has spacer built in. FK HRSMX I believe?? They seem...
-
DialedShockPrep replied to the thread Local Legend Don't Call It An S10.this might help you out with packaging as well, but on my truck and Marcels, and a handful of others, the link that connects the pitman...
-
DialedShockPrep replied to the thread Local Legend Don't Call It An S10.That all makes way more sense now! Haha CookCraft did just finish up a green explorer with Dana 35 beams and 44 knuckles, with...
