Brett_408's latest activity
-
Brett_408 replied to the thread Truck Spottings.Shane is a pool guy now. Does my sisters pool and still fab on the side from time to time. -
😂 -no caption needed
-
Brett_408 replied to the thread Tree trunks 87 FSB.Thank you. I plan on plumbing in aftermarket residuals.
-
Brett_408 replied to the thread Tree trunks 87 FSB.100% and way cheaper!
-
Swapping to an opposite side port is 100x easier, though.
-
Let me see if I can find the link of the one I bought. It’s been a while so I don’t remember which year it was. And I found out about...
-
Yeah Ford used same bolt pattern stuff for a lot of their master cylinders. So Rangers can go F150's to swap ports to inside, or vise...
-
Brett_408 replied to the thread Tree trunks 87 FSB.Dang you don't realize how helpful that was to read the explorer MC is the same as the bronco but reversed ports. My stock MC is...
-
After the steering was more or less figured out, it was on to the steering equipment, I was shooting for a 1500psi 4.5 gpm tc pump...
-
Built some shock mounts on the beam, I didn’t truss the beam up, but I will reinforce when I pull the beams to final weld and prep...
-
It was gonna be a two weekend install on the Solo cage…. Then I decided to push the cage to the front and set it up for a 14” coil and...
-
Hi! This will be the build thread for my 1987 Bronco. I started a thread on go fast broncos but it seems like everyone is over here...
-
Tree trunk ho slapper actually But my government name is Geoff… Anyways I like go fast stuff and started a build thread for my 87...
-
Brett_408 reacted to Camper shell fun's post in the thread Toyota Pickup (old Koenig racing truck) with
Like.
I did a few off-road trips with Mike in my first few years at Total Chaos. I raced with him in Primm a couple times too in that truck... -
I got the panhard bracket Laser cut, got the upper links back from Powder Coat, welded up all the axle parts and a little bit of spray...