4XForOffroad's latest activity
-
As mentioned by the_falab, add supports to the wheel opening. I added supports at the wheel openings. 1" tube welded to the body with a... -
frame horns cut off placed an order for 4 coilovers. 2.5x10 and 2.5x16 bypasses 3.0x10 and 3.5x18 4 bump stops. 2.0s up front and 2.5s...
-
This is where i decided i wanted to link the truck instead of leaf springs. and really realized i should have just bought a stock truck...
-
So welded on the mazulla front shock towers and forgot to take photos smh. welded on front frame plates. then i bought the TE designs...
-
finished the cage, built cab tie ins and floor close plates, stitch welded all of them in, and then silicone sealed the floor plates. i...
-
so in febraury of 2025 is when i put the truck up on jackstands and started to tear into it, luckily had guidance of a few friends who...
-
4XForOffroad reacted to turbomonty's post in the thread The Turbo Glue Factory: Boosted Colt Build with
Like.
Time to finish up some welds -
-
Well updates to the Bronco are going to be even slower than what they are now I finally got my own place for my family and it has a...
-
https://www.instagram.com/s/aGlnaGxpZ2h0OjE3ODQzNDQ0MTE1Njk1NDcw?story_media_id=3842835660923885053&igsh=NTc4MTIwNjQ2YQ== Truck did...
-
Found thank you
-
Found thank you
-
Hey I have the q80 rear suspension with raptor shocks the rear shock mounts extended shackles with drop down hanger ready to bolt on...
-
4XForOffroad reacted to GearheadGrind's post in the thread The rebuild thread for my 1972 Chevy Stepside: Stubbs with Like.
Hey all, I'm a relatively new joiner but met some of you out at KOH this year. I had just finished my build and had a bad night on the...
-
Pax side bump can and limit strap done. Cut up some 2x4 rect tube for the gusset and it turned out great Hows does this gap look for...