Armrunner
Member
The time has come to let go of my double cab. For those that don’t know it, Mikey over at the Fab Lab in Simi has done 90% of the work. Not a big car salesman as I typically hold onto my stuff for long periods of time. Truck is not flawless but is in very good shape. Not sure where to price it but i am starting at 25k. Located in Bakersfield. Parts list below.
Cons-
Famous 1st Gen headlight/side marker mounts are jankey and I added zip ties in places to hold everything down better. Planned to cut it all out and install a 1 piece clip but never did it.
Fiberglass was never painted after install but still looks decent. Rear bedcage could use some touch up paint or powder from loading/unloading during trips.
162k Miles
Power windows and locks
Manual Seats
In-Dash Pioneer Touchscreen Dvd/CD player
4.7L V8 W/Auto Trans
GG 30” Race light bar
GG GP20 amber dust light (2)
SDHQ Billet dust light mounts
Solid Offroad motor mounts
Unichip W/digital screen
K&N 57 Series CAI
Flowmaster 40 Series 3” muffler
Optima Yellow Top relocated under truck with accessory hookups under hood
4.88 Gears
(5) BFG KM3 37x12.50R17
(5) 17x9 Raceline 935BZ Defenders
BTF Custom Race Kit (strapped/bumped at 16”s and cycled w/the 37s)
Fox 2.5X10” Coilovers
Fox 2.5X10” Triple Bypass
Fox 2.5x4” Bumps
Steering rack gone through with Total Chaos Steering Kit
Mcneil 4” Front Fenders
Mcneil 4” Bedsides
Fox 2.5x16” triple bypass
Deaver C27 spring under Leafs (strapped at ~17”s)
MCM Fab spring under shackles
BBM Racing shackle hangers
Total Chaos U-Bolt plates
The Fab Lab low profile bed cage
DriveShaft Pro Custom Driveline
Tubed Rear Bumper
Frame horn style tube front bumper W/Skid
James Way Offroad D44 hub covers
Im sure there’s more but all I can think of. Have a few spare parts to throw in with it. Will add to the post if I can think of anything else.
-Brent
Cons-
Famous 1st Gen headlight/side marker mounts are jankey and I added zip ties in places to hold everything down better. Planned to cut it all out and install a 1 piece clip but never did it.
Fiberglass was never painted after install but still looks decent. Rear bedcage could use some touch up paint or powder from loading/unloading during trips.
162k Miles
Power windows and locks
Manual Seats
In-Dash Pioneer Touchscreen Dvd/CD player
4.7L V8 W/Auto Trans
GG 30” Race light bar
GG GP20 amber dust light (2)
SDHQ Billet dust light mounts
Solid Offroad motor mounts
Unichip W/digital screen
K&N 57 Series CAI
Flowmaster 40 Series 3” muffler
Optima Yellow Top relocated under truck with accessory hookups under hood
4.88 Gears
(5) BFG KM3 37x12.50R17
(5) 17x9 Raceline 935BZ Defenders
BTF Custom Race Kit (strapped/bumped at 16”s and cycled w/the 37s)
Fox 2.5X10” Coilovers
Fox 2.5X10” Triple Bypass
Fox 2.5x4” Bumps
Steering rack gone through with Total Chaos Steering Kit
Mcneil 4” Front Fenders
Mcneil 4” Bedsides
Fox 2.5x16” triple bypass
Deaver C27 spring under Leafs (strapped at ~17”s)
MCM Fab spring under shackles
BBM Racing shackle hangers
Total Chaos U-Bolt plates
The Fab Lab low profile bed cage
DriveShaft Pro Custom Driveline
Tubed Rear Bumper
Frame horn style tube front bumper W/Skid
James Way Offroad D44 hub covers
Im sure there’s more but all I can think of. Have a few spare parts to throw in with it. Will add to the post if I can think of anything else.
-Brent
Attachments
Last edited:
