1974 Chevy Luv

Beam Design looks good. Most don't run the bottom plate they just have the tube be the bottom of the beam but they way you have it will be strong just a little extra welding, but you can use that to wrap the lower uniball better so that's a win.
Thanks man!
Yeah that was pretty much my plan, I’m going to add some slots to the bottom plate and then wrap the uniball with the bottom plate
 
So few luvs out there, most of the ones I've seen built are drag trucks, nice to see one being built as a desert rig.
So few luvs out there, most of the ones I've seen built are drag trucks, nice to see one being built as a desert rig.
AyoOoOo the LUV is on the come back!

Nüe to the forum but I built a 1974 LuVRunneR
probably need to learn to make a post on it but since parts were / are limited with LUV’s I decided to chassis swap it on top of a 87’ 4Runner since the wheel base is hella close


We finna get hella gas station thumbs up but dude when you start wrapping up lmk so we can do a link up photo shoot run lol
 

Attachments

  • IMG_8233.webp
    IMG_8233.webp
    297.4 KB · Views: 11
  • IMG_3520.webp
    IMG_3520.webp
    1.9 MB · Views: 9
  • IMG_3712.webp
    IMG_3712.webp
    1.9 MB · Views: 9
  • 736924DF-3F3E-4A15-9569-42CC89990049.webp
    736924DF-3F3E-4A15-9569-42CC89990049.webp
    152.4 KB · Views: 6
  • IMG_7790.webp
    IMG_7790.webp
    2.2 MB · Views: 10
Back
Top