troysladeck's latest activity
-
troysladeck reacted to DefiantOne13's post in the thread 88 Toyota 4runner build (Old Red) with
Like.
Took it out and enjoyed it and had a blast honestly. Put new wheels on it which I hated immediately after I bolted them on 🤷🏼♂️ About a... -
Changed the shape of the swingers to make clearance, dropped the crossover tube from 1.5" to 1.25", and moved it rearward a bit on the...
-
troysladeck replied to the thread RHDTTBXJ.There isn’t any room to do any sort of bracing on the left side of the crossmember with the 3rd and driveshaft installed. That right...
-
-
troysladeck replied to the thread RHDTTBXJ.I did mine slightly different than yours I think. I kept it flat on the back side edge of the beam and then bent it inwards on the last...
-
troysladeck replied to the thread RHDTTBXJ.Ran into my first issue with the diff installed. Apparently I welded the back reinforcement plate in the wrong spot. It made sense to me...
-
-
Sunday Funday mountain rip Dirt miles: 25~ish Near Beers: 1 Children: 5 Snacks: Snickers ice cream bars & skittles gummies Vehicles...
-
I just moved the steering to on top of the knuckle and it reduces bumpsteer at droop, gains a small amount at bump. I won't be doing it...
-
troysladeck replied to the thread RHDTTBXJ.Short answer, no. I haven't put the axles in the beams yet (mainly because the axle shafts and 3rd member have been torn apart) but I...
-
-
troysladeck replied to the thread RHDTTBXJ.Got the last little bit of welding finished and everything painted. Ready for final assembly Also got the 3rd member cleaned up. Been...
-
-
troysladeck replied to the thread 2026 Leduc Swap Meet.Is anybody from Havasu going to the swap meet? I have some beams that I’m trying to sell there
-
Finished up rear bedside mounts. Added a kicker for the rear corner. These are very solid all bolted up. Threw the new wheels and tires...
-
A few things are at play here 1. I’m using explorer frame section and beams so I can’t use a purchased d44 kit 2. The knuckles are...
-
troysladeck replied to the thread Local Legend Don't Call It An S10.I know explorer dudes do it when they do the d44 knuckle swap, just need to ream it out from the top and buy tapered inserts. Just...
-
I’ll take a look at it when I’m back at the laptop next week. Doing that should help bumpsteer a little at droop since the pitman arm is...
-
troysladeck replied to the thread Local Legend Don't Call It An S10.Since you’re messing with TTB steering right now I got a question for you… Does flipping the tie rod onto the top side of the knuckle...
