Klever's latest activity
-
Switched from a 6 button thingy to an 8 button thingy, also put a switch in the dash to give the panel power so I don’t have to have the... -
Klever reacted to 84Prerunner's post in the thread Rear End Full Floater Hubs? Options and Opinions with
Like.
Anything with 40s should have 40spline or larger axles. Not all 35 spline axles are created equal either. With a healthy v8 even on 37s... -
I learned a few things doing it and now that I have everything working as it should, I’ll share my experience/headache. This is gonna be...
-
We don't have any bleed holes in our piston and run a 6" metering rod that is a tight fit where it closes off the by-passport at the...
-
got some cage to cab plating done and was able to grab a fresh McNeil dash off marketplace, also got a deal on 3rd prp comp elite seat...
-
Another 2.5 coil and bypass set up on stock width beams. With a 4” bump sleeved to 2” I haven’t railed miles of whoops yet but the...
-
2.5/3.5 combo on a stock width bronco i did years ago.
-
PFA She didnt walk away unscathed, but we drove it back to camp and had her mended that night.
-
Lots of Toyota guys are rock / mall crawlers / overbranders though. Look at these build threads for 1st Gen Tacomas compiled here that...
-
Klever reacted to desert_steve's post in the thread Autobody / fiberglass recommendations with
Haha.
You ever seen those videos on IG where they use superglue and crushed-up ramen noodles to fix dents and rust holes? We should try to see... -
When hubby comes home from work and asks if you wanna find snow…you say yes! This is the state of the trail up the street from our...
-
I have no idea if this is the right place to post Finnegan but here we are 🤷🏻♀️ My beloved Finnegan 4Runner is an 04 4Runner with a...
-
I can’t comment on their suspension, but the dudes on the Tundras.com forums seem to complain about a lot of things wrong with them...
-
What years are 3rd gen tundra ? I have a 2013 Tundra Crew Max thing is massive in inside and out. Its got an upper and 2.5 ADS 's on it...
-
I have a Harley cylinder with a piston at the bottom that's the perfect size for a little plant. The plant is still in the plastic...
