Hansoloo's latest activity
-
Comparing apples to oranges to cucumbers over here, but: the last few trucks I’ve linked were 11” vertical separation at the axle 7”... -
Got the deavers cycled after a lot of cutting Amazon bump stops for the win Tube bending class with Micheal allen Still need to...
-
Hansoloo reacted to Hambone's post in the thread Local Legend Not much left Tacoma left... 4500 koh build with
Like.
Front and rear axle are all together. Need to order some barbs to drill and tap the fill caps for breathers. I ordered a wfo skid for... -
Hansoloo reacted to Hambone's post in the thread Local Legend Not much left Tacoma left... 4500 koh build with Like.
Another easy win today. Garage Generator had an issue two days ago and was able to figure that out. So that was a relief as they aren’t...
-
Whats up, Im Matt in Ramona, cool to see a forum come back ( used to be on desert rangers than later socal tundras). Been camping and...
-
Hansoloo replied to the thread 78 K10 with a 6.0L twist.Old harness out, starting in on modifying the new one to mate up well with the LS and transferring a few plugs that you can’t buy new...
-
-
Trip #3 Superstition no show stoppers. It did get hot in a sand wash so I might have to find a bigger radiator that works with the stock...
-
-
Or do a u-bolt eliminator kit and weld tube sleeves thru the truss
-
Been a while but have been updating the truck more and more, hands down has been the best truck I’ve had with it’s simplicity and usage...
-
So. It’s done, well kinda. I don’t have time to finish the light bar or wire any accessories up but it’s driving and dirt worthy...
-
One for the nerds like me
-
With the drivetrain placed damn near close, I spent the rest of the day locating my radius arm mounts. Kept them as long and near center...
-
We are getting close! From Main Cab to Fuel Cell Carrier, tubes have all been normalized and got quotes back for. Working on the front...
-
That what I’ve seen, it hasn’t been too bad. That cross member is what has given me the most trouble. May need to relocate a cab mount...
