bullnerd's latest activity
-
BWell added a 1in tube going across landing in the middle of shock mount. Love how it turned out. Played the steering box in and added...
-
BWell got a little more time today to get some more things done. Made some lower shock tabs which will get overlays, had moved the shock...
-
BWas able to do a little tube work tonight, not as much as I hoped though. I ran out of talent on the skid plate tubes and had to scrap...
-
Bbullnerd reacted to Aaron's post in the thread Dont call it a build (Border Patrol raptor) with
Like.
Next up was some budget Amazon design amber lights on the bumper, GG a pillar lights (green and amber lenses) and a free 50” light bar... -
BBent tubes on the passenger side to get the lacing in. Still can't remove the header with these tubes. But maybe once I'm done modifying...
-
Bbullnerd replied to the thread Juberafab portfolio.That’s a beautiful cast weld if you ask me. Nice job.
-
BSome cast welding. Not may favorite, but getting it done. We preheated it and cleaned it a stainless brush to start. This turbo 400 is...
-
BLOTS going on the last 2 weeks! got the motor pulled and the trans/tcase dropped off for upgrades Rear fenders all mounted up Spencer...
-
BStarted mocking up the coilover which is a pretty tight fit with the spring on. Got it to were everything cleared and cycled ok but the...
-
Bbullnerd replied to the thread Hydrolocked 1995 explorer.Nice. I had a 2000 AWD v8 version for a DD. Was a blast on the street and worked fine on the trails here in NJ. I dig that bumper/push...
-
BOverall the explorer wast in great condition, paint needs a wax, tires were nearly new, interior was clean, but needed a headliner. Got...
-
BThis is my 98 4runner limited that I’ve been building for the last 3 years and I thought I would finally start a thread on it since I’m...
-
Bbullnerd reacted to turbomonty's post in the thread The Turbo Glue Factory: Boosted Colt Build with Like.
Time to add some gussets and weld the cage all up. Once this is done the front tubes will lock the body on the tubes
-
Bbullnerd reacted to turbomonty's post in the thread The Turbo Glue Factory: Boosted Colt Build with Like.
I can chop saw notch very good. For square tube I use the cnc mill....
-
BThis was a tiny BLM area off of the highway and they had that cable ran around the whole perimeter. Ideally they need to put reflectors...