BROmanian's latest activity
-
BROmanian replied to the thread Project 69.Had this material laying around so we decided to use it as a firewall or as I would like to call it bullet proofing the front of the car. -
-
BROmanian replied to the thread Project 69.Decided to make a skid plate for the front. I was able to bump form it on the press, not to shabby.
-
-
BROmanian replied to the thread Project 69.It's time to work on the engine before it goes in the frame for the last time (lies). Since I'm rotating the intake from factory I...
-
-
BROmanian replied to the thread Project 69.Designed this super intricate (not) fuel tank made out of 1/8 5052 aluminum, cut it on the laser and bent it on the bender. Lots of...
-
-
BROmanian replied to the thread Project 69.Time to move on to the fuel tank. Got this fuel pump setup from Radium. I chose it because it has 2 pumps, one lift pump and the second...
-
-
BROmanian replied to the thread Project 69.Installed the pedals in the correct location this time so that I could place the throttle pedal. Also installed the seats, forgot to...
-
-
BROmanian replied to the thread Project 69.Since I apparently have motivation to do sheet metal work I need to take advantage of the situation. Started making the inner floor...
-
-
BROmanian replied to the thread Project 69.3 hours later, no not really but it was time to move on. Now when the frame is welded it was time to start on the interior. Made this...
-
-
BROmanian replied to the thread Project 69.Today is a good day because today we get to weld the chassis but today is a long day because we needed to remove engine tranny and the...
-
-
BROmanian replied to the thread Project 69.I needed to finish the rear shock mounts to add some extra strength so I made these fancy straps from some scrap material laying around...
-
-
BROmanian replied to the thread Project 69.Mounted the radiator with some angle aluminum that I welded to the radiator and made 2 brackets that will be welded to the frame. Bought...
-
-
BROmanian replied to the thread Project 69.Time for spare tire mount fab. Made these threaded bungs on the lathe drilled perfectly straight holes and made cross bars that the...
-
-
BROmanian replied to the thread Project 69.Went ape shit and made a metric fuck ton of tubes. Turns out making straight tubes is easier than rolling and adding shit ton of bends...
-
-
BROmanian replied to the thread Project 69.Working on some spare tire mounting ideas and tube layout for the rear.
-
-
BROmanian replied to the thread Project 69.Scope out the prefect Mylar template laid out on the shop floor, ensuring that I make the same exact tube every time.
-
