BROmanian's latest activity
-
BROmanian replied to the thread Project 69.After abandoning the Home Depo painters tape I went back to the phone screen CAD and created this gem. This is why I said temp... -
-
BROmanian replied to the thread Project 69.Also huge shoutout to Turboyota for letting me work on this in his shop. And generally just being a great friend. It's really nice to...
-
BROmanian replied to the thread Project 69.While I was scheming about how the rear engine cage will look I moved inside the car to make tubes. I really wanted to roll the tubes...
-
-
BROmanian replied to the thread Project 69.Oh snap, they finally meet. Those barely tacked on transmission mounts are fighting for their life. As they say everything worth having...
-
-
BROmanian replied to the thread Project 69.Made the notches for the engine tubes. Now when the rear shocks are in, it's time to make the engine cage.
-
-
BROmanian replied to the thread Project 69.Take 2 rear shock mounts took 1500 bends to make but they turned out great. Also rolled a cross bar for the roof. The SWAG tube roller...
-
-
BROmanian replied to the thread Project 69.Dang, that is just ridiculous. I always get it from Patton steel because I get the corporate discount but shit, that's expensive. I...
-
BROmanian replied to the thread Project 69.Yes correct, 3/16 4130 chrome moly
-
BROmanian replied to the thread Project 69.That sounds like a wonderful Saturday night. Feel better
-
BROmanian replied to the thread Project 69.So I did the right thing and enlisted the help from my 10 year old to build the most epic rear shock mount. Sparks were flying, music...
-
-
BROmanian replied to the thread Project 69.Started the upper shock mount but I quickly realized that the tube to be made there was going to be too complicated and I didn't like...
-
-
BROmanian replied to the thread Project 69.Now that I know where the shocks will be I went ahead and made the correct lower shock mounts. Cut it on the bandsaw after some amazing...
-
-
BROmanian replied to the thread Project 69.A friend designed these shock stands and gave me the files. So I sent them to the laser and got them cut. All I had to do is weld it...
-
-
BROmanian replied to the thread Project 69.Got frustrated with the rear suspension so I made these close out panels for the front of the body. The front inner fender liner panel...
-
-
BROmanian replied to the thread Project 69.Time to start back up on the rear suspension, just randomly tacking the lower shock mounts to see where it works the best.
-
