Brett_408's latest activity
-
Wayne is a super cool dude. He brings it to cars&coffee more often than not. Such a rad little bronco. -
You have to machine the D50 shaft so it will fully go into the diff and grind the end a little bit so the c-clip will fit back into the...
-
Brett_408 replied to the thread PILE oh shit bronco 86.I had to grind out the stub shaft coming out of the 3rd for the U joints not to bind like you said. So far no issues. Is the Dana 50...
-
Yeah it's one thing a lot of people overlook when building these TTB front end's. They don't fully cycle everything with the axles...
-
Brett_408 replied to the thread What happened to these trucks?.His names Wayne Todd his shops in San Clemente still has this bronco and its still very nice. Cool guy.
-
Brett_408 replied to the thread PILE oh shit bronco 86.I was cycling 18" with a 14" stroke but had axle binding on the passenger side axle pocket and I didn't want to grind out any more of...
-
Brett_408 replied to the thread Tree trunks 87 FSB.I should know in about a week how mine will look when I start doing those tubes. I'll reach out for those pics if I need some ideas...
-
73.375" wms to wms. LSK 5x5.5 hubs. Hubs missing seals and some bolts but work great I have all the part numbers you'll need. Ruffsfuff...
-
Brett_408 replied to the thread Tree trunks 87 FSB.What did you do about the wiper linkage?
-
Brett_408 replied to the thread Hoopdee 94.0 Bronco.Daily Update: Finished the rear window lacing, C-pillar side gussets and lower door bar tubes. Waiting on seats from PRP to start...
-
-
That guy should advertise his cages better. Thing is sweet.
-
Brett_408 replied to the thread Hoopdee 94.0 Bronco.So the V in the back window still needs another tube that will go down to the C pillar junction going to the frame. I just haven't put...
-
Brett_408 replied to the thread Hoopdee 94.0 Bronco.I was thinking about it and I will probably add tie ins there because I have easy access to it right now and down then road I'll...
-
Brett_408 replied to the thread Hoopdee 94.0 Bronco.A Pillar tube will get welded to the cabs a pillar directly for the B pillar I have some dimpled died 14 GA plates then along the door...
-
Brett_408 replied to the thread Hoopdee 94.0 Bronco.Last night... fitted the B pillar tubes and a few more lacing tubes in the back then welded everything out. It is very nice welding and...
-
