Baconcreekmetal's latest activity
-
BBaconcreekmetal reacted to NODNARB's post in the thread Supercharged 4x4 ranger condensed version with
Like.
Once the chassis work was all done it was time to turn our patio into a paint booth. Customer picked a grey Powdercoat for all the... -
BBaconcreekmetal reacted to NODNARB's post in the thread Supercharged 4x4 ranger condensed version with Like.
These are horribly out of sync… scrolling through my phone finding pics of this between random life things, etc. guess this means I need...
-
BBaconcreekmetal reacted to NODNARB's post in the thread Supercharged 4x4 ranger condensed version with Like.
Made engine and trans solid mounts, stainless exhaust with high flow cats into a single borla muffler, and a pic of mocking up the tilt...
-
BBaconcreekmetal reacted to NODNARB's post in the thread Supercharged 4x4 ranger condensed version with Like.
Getting the front shock mounts made here, and looks like the cantilever for the master cylinder is partially made. Rear half going in...
-
BBaconcreekmetal reacted to NODNARB's post in the thread Supercharged 4x4 ranger condensed version with Like.
Looks like this thread will start about the halfway point on this truck… been terrible about posting anything the last couple years...
-
BHere's some of the sway bar setups and bumpstop locations/clearance I found
-
BAlright, been a month since I started looking for answers regarding the sway bar and haven't come up with much. Made it out to the...
-
BThank you! Simple and not what some of the real talented people have done, but we enjoy it. Ha, yeah but I was able to see some things...
-
BThank you! It would help. Luckily I have a whopping 1 picture of it since we've been playing with it. 120 miles in Lucerne. Can't...
-
BFist off, bumper jacks for the win. Ghetto lift for the less fortunate . Got the wheels back off. My wife will drop them off to be...
-
BIll seal the cover and screw it down. All the brake lines are done. I swapped to a newer master with a 1.25” bore. Hopefully it works...
-
BBrakes on the axle are done. Pulled and installed axles more times than I want to admit but they’re solid.
-
BAlright 1 caliper bracket down. The wheel fits and i glued the outside down. I need to remove the axle and weld the inside but ran out...
-
BFive long years but the bypasses are on. Got the shock mount done and cycled the suspension. Flattened i still have 5.5” of space so im...