Baconcreekmetal's latest activity

  • B
    Baconcreekmetal reacted to HTO's post in the thread Carly's 96 with Like Like.
    pent a bit of time working on Carly’s bronco this weekend. Finished the shock mount minus the actual shock tabs. Its tight but it fits...
  • B
    Baconcreekmetal reacted to HTO's post in the thread Carly's 96 with Like Like.
    Finally got a minute to pull apart some stuff and get the rotors on the axles. Inboard rotors means harder maintenance however, all 4...
  • B
    Baconcreekmetal reacted to HTO's post in the thread Carly's 96 with Like Like.
    These are pretty. Im going to try a 350 disc disc master and 2 lb residuals. Also looking into running my own disc setup in the rear...
  • B
    Baconcreekmetal reacted to HTO's post in the thread Carly's 96 with Like Like.
    Its dusty but it holds its own weight. I needed to flip it around to figure out my shock mounts. I will say I really like the way it sits.
  • B
    Baconcreekmetal reacted to HTO's post in the thread Carly's 96 with Like Like.
    Some more progress. Clearanced the cab support underneath and will reinforce. Leafs are in and rear end is underneath and will get the...
  • B
    Baconcreekmetal reacted to HTO's post in the thread Carly's 96 with Like Like.
    Alright i got the rear end pulled from Carly’s bronco. First off, a bumper jack is an amazing tool. It saved me a boatload of time...
  • B
    Baconcreekmetal reacted to HTO's post in the thread Carly's 96 with Like Like.
    The girls are now racing 2 series. 170s and sprint carts BUT we finally rear end parts! I ended up ordering a complete rebuild kit from...
  • B
    Baconcreekmetal reacted to HTO's post in the thread Carly's 96 with Like Like.
    hey had a boatload of brake dust so i ordered some hd cleaner and it worked real well. I also got the electrical all done and now have...
  • B
    Baconcreekmetal reacted to HTO's post in the thread Carly's 96 with Like Like.
    Finished the silicone vacuum lines, smog equipment put back, and continue to try to keep the spaghetti an organized chaos. Cleaned up...
  • B
    Baconcreekmetal reacted to HTO's post in the thread Carly's 96 with Like Like.
    Its back under its own weight after 4 years. It sid drop when i sawed the wheel so the cut and turns should be good. I need to finish...
  • B
    Baconcreekmetal reacted to HTO's post in the thread Carly's 96 with Like Like.
  • B
    Baconcreekmetal reacted to HTO's post in the thread Carly's 96 with Like Like.
    Well the limit strap is hung, and the bump has been converted to a 2" bump. It is now in it's place with new seals and good oil...
  • B
    Baconcreekmetal reacted to HTO's post in the thread Carly's 96 with Like Like.
    Okay finished a few more things. Upgraded power steering pump, new lines, cooler (not the stock one), and switched to the 1 ton booster...
  • B
    Baconcreekmetal reacted to HTO's post in the thread Carly's 96 with Like Like.
    Woohoo! Got another day. Made the mount to hold the intake, finished the bump can for the drivers side and rough aligned it. I think im...
  • B
    Baconcreekmetal reacted to HTO's post in the thread Carly's 96 with Like Like.
    Again the girls' racing has taken time, but I have been quietly, slowly moving forward. I found a set of what was classified as Q80...
Show older items
Back
Top