95_Bluwhale's latest activity
-
95_Bluwhale replied to the thread Leadfoot Grey 95 Bronco.Heads are all set I’m looking to build a 460 next start from scratch and put the 5.8 in a 78 f150 -
95_Bluwhale replied to the thread Anybody have tips for regearing?.I have one from the time I swapped gears into the current housing but that was very minimal work compared to the whole swapping gears...
-
95_Bluwhale replied to the thread Anybody have tips for regearing?.Work station for the rear not ideal or organized but gotta make it work using whatever the bronco has for tools to do the change
-
-
Need something cheap but can work my trans started slipping towing the dirtbike to glen Helen haven’t tried it if maybe it was just...
-
FYI VSS tooth count is gear specific, the rest of the dudes apparently don’t know this. Anyway it makes exsisting ford math work so your...
-
95_Bluwhale replied to the thread Anybody have tips for regearing?.Yeah that was something I was hoping for I’ve read about it but not the process
-
95_Bluwhale replied to the thread Anybody have tips for regearing?.Kind of my plan just to see how stock shims fit post the pattern and see the overall consensus
-
95_Bluwhale replied to the thread Anybody have tips for regearing?.Future plan that's why doing the 8.8 the cheap way with a lunchbox locker but the truck desperately needs the gears
-
95_Bluwhale replied to the thread Anybody have tips for regearing?.Picking up a carrier tomorrow from marketplace so i can start with the front first
-
Take your time and don’t be afraid to do it over and over again. I think people’s biggest mistake is getting frustrated after trying 23...
-
95_Bluwhale replied to the thread Anybody have tips for regearing?.I was looking at that exact one and my whole truck is just me winging it from learning to weld, wire and troubleshoot I just used every...
-
https://a.co/d/8vfmLZL -This is the carrier you need for the 4.56 gears in the Dana 44. Or it’s the one I used anyways. - I used the...
-
Might want to go to harbor freight and buy 20 ton press. The d44 front diff is a whole lot easier to slide the ring gear shims in place...
-
95_Bluwhale reacted to Cameronswmp9's post in the thread Anybody have tips for regearing? with
Like.
Use your old bearings as set up bearings. After you press them off your old stuff, Dremel them out some so it's not exactly a press fit... -
95_Bluwhale replied to the thread Anybody have tips for regearing?.8.8 and D44 TTB Probably check out the spacer that’s sounds way easier than a crush sleeve I’ve overdone one last time and that whole...
