turbomonty's latest activity
-
turbomonty replied to the thread The Turbo Glue Factory: Boosted Colt Build.Time to fight the final boss in fabrication Main center link and then baby tie rods to the knuckles -
-
turbomonty replied to the thread The Turbo Glue Factory: Boosted Colt Build.Time to finish up some welds
-
-
turbomonty replied to the thread The Turbo Glue Factory: Boosted Colt Build.Chucked up the front rotors in the lathe and had chatbot write a macro to turn off some mass dropped 2 pounds off. the pads only ride on...
-
-
turbomonty replied to the thread The Turbo Glue Factory: Boosted Colt Build.i just have about 4-8 hours a weekend
-
-
turbomonty replied to the thread The Turbo Glue Factory: Boosted Colt Build.Power steering resivour done
-
-
turbomonty replied to the thread The Turbo Glue Factory: Boosted Colt Build.So glad the alternator and power steering pump are done Now just some idler pulley's to add in there
-
-
turbomonty replied to the thread The Turbo Glue Factory: Boosted Colt Build.Dimples the power steering resi with some stuff laying about
-
-
turbomonty replied to the thread The Turbo Glue Factory: Boosted Colt Build.Not going to chop suey on this thing. It just needs to lay square to the 2" tubing
-
-
turbomonty replied to the thread The Turbo Glue Factory: Boosted Colt Build.Gen 1 alternator mount is shit and not tall enough 4140 billet space craft part in the making
-
-
turbomonty replied to the thread The Turbo Glue Factory: Boosted Colt Build.Super hi tech squaring fixture before Tig welding
-
-
turbomonty replied to the thread The Turbo Glue Factory: Boosted Colt Build.ok, so interestingly enough while fumbling pieces around i found out that if i run the uca from level up to 2 degrees (3/4") in the...
-
-
turbomonty replied to the thread The Turbo Glue Factory: Boosted Colt Build.My god it all works in the front Got the pump mounted and the UCA all fitted in there
-
-
turbomonty replied to the thread The Turbo Glue Factory: Boosted Colt Build.Went into racecar mode on the engine mount
-
-
turbomonty replied to the thread The Turbo Glue Factory: Boosted Colt Build.I am the ship breaker now! whipped out my harbor freight plasma cutter and with my carnival cruise ship pieces i now have enough 6mm and...
-
