turbomonty's latest activity
-
turbomonty replied to the thread The Turbo Glue Factory: Boosted Colt Build.planning on running the front of the lca way forward like in red. this will clear all my frame shit on both sides then the coil over... -
-
-
turbomonty replied to the thread The Turbo Glue Factory: Boosted Colt Build.Ran out of technoligy the other week and had to buy some
-
-
turbomonty replied to the thread The Turbo Glue Factory: Boosted Colt Build.Pulled apart the door skins. Going to cut out new backers and glue some black carpet on there. Home depot to the rescue
-
-
turbomonty replied to the thread The Turbo Glue Factory: Boosted Colt Build.Door cams where pretty shit I'm going to use some roller bearings instead of sleeves. I will likely draw up the cam follower as one is...
-
-
turbomonty replied to the thread The Turbo Glue Factory: Boosted Colt Build.Throttle linkage slightly fugly but works very smooth with the 2 bearings i was planning on nylon bushings but figured they would melt...
-
-
turbomonty replied to the thread The Turbo Glue Factory: Boosted Colt Build.
-
-
turbomonty replied to the thread The Turbo Glue Factory: Boosted Colt Build.at times people will want to whole story to a car build and me being a bit of a troll i came up with something more juicy than the...
-
-
turbomonty replied to the thread The Turbo Glue Factory: Boosted Colt Build.It takes a week or more to get the parts is the only heart ache
-
turbomonty replied to the thread The Turbo Glue Factory: Boosted Colt Build.Cut up some 3/8" home depot flat bar for the LCA mounts. Bolt threads will be bearing on one side so I just cut under size and ran the...
-
-
turbomonty replied to the thread The Turbo Glue Factory: Boosted Colt Build.had send slut send cut out the 2 brake caliper pieces all nice like for about 35$ they are just clipped from my CAD so they slide right...
-
-
turbomonty replied to the thread Uh, Hi!.welcome
-
turbomonty replied to the thread Project 69.Great thread
-
Oh boy, I wish that you hadn't uploaded this sweetness to the interwebs, last time this happened the Berlin wall fell and the cold war...
-
turbomonty replied to the thread The Turbo Glue Factory: Boosted Colt Build.Got the prime weld up in the eagles nest with the Lincoln. I briefly tried the protig on the thin ass 1.25" coolant tube (.055") and the...
-
