tunde.tanner's latest activity

  • tunde.tanner
    tunde.tanner reacted to 4xFoorOffroad's post in the thread another white 1st gen with Like Like.
    I agree with adding bumps and sticking with the stock bolt - you can get the part number by putting in your vin at partsouq.com and...
  • tunde.tanner
    tunde.tanner replied to the thread another white 1st gen.
    That would makes sense, i hit hard on the driver side and the truck does not have bump stops as of now. Bumps are definitely on the list...
  • tunde.tanner
    tunde.tanner reacted to 4xFoorOffroad's post in the thread another white 1st gen with Like Like.
    UCA bolt is a M14 so 9/16 grade 8 the same length would work. Or this approach replaces it with shorter bolts. October 2021 If it...
  • tunde.tanner
    tunde.tanner replied to the thread another white 1st gen.
    SOLD!!! I really appreciate that information. I will definitely be buying the uniball conversion. Maybe you can work some magic on my...
  • tunde.tanner
    tunde.tanner replied to the thread another white 1st gen.
    Very true, honestly didnt really think of it like that, lets add another thing to the list🤝
  • tunde.tanner
    tunde.tanner replied to the thread another white 1st gen.
    MAY 13 2025 I was able to get some time in the garage after work, i wanted to get the front end pulled apart to start the prep. I havent...
    • IMG_3477.jpeg
    • IMG_3478.jpeg
    • IMG_3481.jpeg
  • tunde.tanner
    tunde.tanner reacted to 02dangerranger's post in the thread Class 2000 ranger with Like Like.
    Very true, if we treat the axle as the fulcrum the 200lbs of tires on top of that would exert the same 200lbs or ~90Kg of mass. The...
  • tunde.tanner
    tunde.tanner reacted to UR_Mawm69's post in the thread Chop Shop Builds with Like Like.
    Question: I want to do the BASE part of the engine cage ONCE and not look back. If I do that.... im looking at it and noticing that I...
  • tunde.tanner
    tunde.tanner reacted to UR_Mawm69's post in the thread Chop Shop Builds with Like Like.
    Didn't do much this weekend, other than clean the shop up.
  • tunde.tanner
    tunde.tanner replied to the thread another white 1st gen.
    so now that we are current, from here on out if im working on the truck im going to be updating the thread day by day as I finish...
  • tunde.tanner
    tunde.tanner replied to the thread another white 1st gen.
    once I got back from the trip I ended up doing solid Offroad motor mounts as well as some solid steering rack bushings from @trevor410...
    • IMG_3066.JPG
    • IMG_3065.JPG
  • tunde.tanner
    tunde.tanner replied to the thread another white 1st gen.
    THIS IS THE NIGHT BEFORE I LEAVE FOR OCOTILLO, THE TRUCK STARTED FOR THE FIRST TIME FOR A YEAR THE DAY BEFORE ITS MAIDEN VOIAGE. LONG...
    • IMG_2946.JPG
    • IMG_2934.JPG
    • IMG_2929.JPG
    • IMG_2924.JPG
  • tunde.tanner
    tunde.tanner replied to the thread another white 1st gen.
    NOVEMBER 2024 TIME TO WIRE AND PAINT DESERT T MINUS 12 DAYS I ended up getting a gglighting 12 gang switch panel to run all of my...
    • IMG_2903.JPG
    • IMG_2901.JPG
    • IMG_2899.JPG
    • IMG_2837.JPG
    • IMG_2850.JPG
    • IMG_2849.JPG
    • IMG_2848.JPG
    • IMG_2650.JPG
  • tunde.tanner
    tunde.tanner replied to the thread another white 1st gen.
    OCTOBER 2024 I have a trip planned for the end of November, im determined to "finish" this thing for then. time to finish my lower...
    • IMG_2876.JPG
    • IMG_2794.JPG
    • IMG_2868.JPG
    • IMG_2867.JPG
    • IMG_2864.JPG
  • tunde.tanner
    tunde.tanner replied to the thread another white 1st gen.
    well it has been some time since I've updated my thread; SEPTEMBER 2024, I ended up cutting the rear cross member out to get the spares...
    • IMG_2597.JPG
    • IMG_2596.JPG
    • IMG_2602.JPG
    • IMG_2632.JPG
    • IMG_2634.JPG
    • IMG_2684.JPG
    • IMG_2740.JPG
Back
Top