troysladeck's latest activity

  • troysladeck
    troysladeck reacted to LoganB's post in the thread 1991 Explorer with Like Like.
    Once over on the wheel bearings, rotate tires, fix a brake line and making sure everything is legit still. Took the shit box express...
  • troysladeck
    troysladeck replied to the thread RHDTTBXJ.
    • IMG_7736.webp
    • IMG_7737.webp
    • IMG_7739.webp
    • IMG_7740.webp
  • troysladeck
    troysladeck replied to the thread RHDTTBXJ.
    Picked up the beams from the welder today. DIY offroad kit went together pretty smooth I didn’t use all the plates and did a different...
    • IMG_7722.webp
    • IMG_7721.webp
    • IMG_7720.webp
  • troysladeck
    troysladeck reacted to SHOP WERX's post in the thread Single 3.0 Coilover vs Dual 2.5's with Like Like.
    PFA She didnt walk away unscathed, but we drove it back to camp and had her mended that night.
  • troysladeck
    troysladeck replied to the thread RHDTTBXJ.
    Left side mocked up and cycled Roughly 8.5” uptravel, 16” overall, 10° caster at ride height, radius arms are dead flat at ride height...
    • IMG_7688.webp
    • IMG_7687.webp
  • troysladeck
    troysladeck reacted to daddio211's post in the thread Toyota minitruck to prerunner... with Like Like.
    Hey all. I've wanted to build a prerunner for a long time, but have been mostly into hot rods and lowered trucks. I can fab, weld, wire...
  • troysladeck
    troysladeck replied to the thread Raptor 2.5 valveing?.
    • IMG_7670.webp
  • troysladeck
    troysladeck replied to the thread RHDTTBXJ.
    Buttload of progress so far. All frame side welding done minus bump stop cans and limit straps Uniballs welded in. Still have to...
    • IMG_7665.webp
    • IMG_7668.webp
    • IMG_7667.webp
    • IMG_7666.webp
    • IMG_7664.webp
  • troysladeck
    troysladeck reacted to 2012SVTSC's post in the thread 1973 F250 Prerunner Project with Like Like.
    Pulled the front clip: Ford 360 out: Moved the truck within reach of my 220v socket: Finial fit checks of the tacked beam kit it...
  • troysladeck
    troysladeck replied to the thread RHDTTBXJ.
    Back in Havasu chippin away at the swap and it’s crunch time! Goal is to have the jeep rolling by next sunday (6 days away) that way I...
    • IMG_7628.webp
    • IMG_7627.webp
    • IMG_7626.webp
    • IMG_7625.webp
    • IMG_7623.webp
    • IMG_7624.webp
  • troysladeck
    troysladeck reacted to thebrassnuckles's post in the thread Bakersfield Shitboxer with Like Like.
    Hello everyone! I forgot I had made this account and never posted an intro. At some point I got asked to make a build thread on my 80...
  • troysladeck
    troysladeck reacted to BFAB's post in the thread B-Fab 3 week Ranger build with Like Like.
    Did a thing for my own truck cause it needed it badly and I knew I could knock it out fairly quick. TE Designs 2” pinched cab cage kit...
  • troysladeck
    troysladeck reacted to Dirtsmith's post in the thread Utah car guy turned Raptor guy with Like Like.
    Hello from Draper I'm Grady, sold my track car project corvette and my Miata to go back to playing in the dirt where i belong instead of...
  • troysladeck
    troysladeck reacted to UR_Mawm69's post in the thread Budget 91 ranger build with Like Like.
    you're not going to like my answer but it really will help you out soooooooooooooooooooooooooooooooooo ungodly much in the end. R E A...
  • troysladeck
    troysladeck replied to the thread Pearl, the 93' Explorer.
    I wish I could run the side steps but they hang so damn low. I also cut and folded the pinch weld seam on the bottom of the cab for...
Show older items
Back
Top