Thicks91's latest activity
-
Thicks91 replied to the thread 1993 Camburg ranger build..I think I figured out what cause the binding in the trans. The first time I took the truck out the driveshaft was about 1/2” to long and... -
-
Thicks91 replied to the thread 1993 Camburg ranger build..I noticed this has a different input shaft than stock. I have another tranny as a donor for parts. I was having engagement issues as...
-
Not sure if this is of any help. But i had a c4 built years ago and installed the 300M input shaft... the way it was machined made it...
-
Thicks91 replied to the thread 1993 Camburg ranger build..Well I managed to screw something up putting this c4 together. The center input shaft slid out about a half inch. So when I finally got...
-
-
Was finally time for the truck to get some 35s, cole over at ERD offroad hooked it up with this set!
-
Daily Update: Finished the rear window lacing, C-pillar side gussets and lower door bar tubes. Waiting on seats from PRP to start...
-
Thicks91 reacted to RW81's post in the thread Local Legend Vital Designs Regular Cab Ranger with
Like.
I’ve never seen anyone mention it happening, granted they’re usually just on a stock truck with stock steering and not a bunch of FK... -
Thicks91 reacted to cbrewer22's post in the thread Local Legend Vital Designs Regular Cab Ranger with Like.
I have the same ps swap and have experienced the same thing last time I drove the truck
-
Thicks91 reacted to RW81's post in the thread Local Legend Vital Designs Regular Cab Ranger with Like.
Been driving the truck all around town, to work etc. Finally got it in some dirt today, around 80 miles on the day. I’ve had a...
