Motiracer38's latest activity
-
Motiracer38 replied to the thread 2025 OFFROAD EXPO OCT 4-5, OC FAIR GROUNDS...The Pacific Airshow will be happening centered around the Huntington Pier on Saturday from 10-4:30. Being that's about 6 miles away we... -
Motiracer38 replied to the thread 3D Print Chat.Inspired by the AI model thread I took a photo from fiberwerx website, cleaned it up a bit with Gemini, and used Rodin to create a 3d...
-
-
Motiracer38 replied to the thread Sequoia Family Crawler.Mine's a bit tighter, 1.75 to the block and using every bit of it for up travel. I was real surprised that even with the rear sump it...
-
Motiracer38 replied to the thread Sequoia Family Crawler.Dang, that would have been useful
-
Motiracer38 replied to the thread Sequoia Family Crawler.Mine is real similar and I tried other outputs but the speedo only reacts to the test on out2. Does the raw frequency show up on the...
-
Motiracer38 replied to the thread Sequoia Family Crawler.Does the Suzuki power it with 12v? I have the Y-R sensor output wired to signal in and output 2 calibrated (oc). Set to low-low and...
-
Motiracer38 replied to the thread Sequoia Family Crawler.Dang, I was hoping you were onto something. Best thing about being wrong is you know what to fix.
-
Motiracer38 replied to the thread Sequoia Family Crawler.Mine is a 2003 with ABS. The 2wd output had two speed sensors, a two wire which pins to SP2- and SP2+ on the ECU and a three wire which...
-
Motiracer38 replied to the thread Sequoia Family Crawler.Yesterday was a big day, I was able get this thing assembled enough for a test drive out of the garage and around the neighborhood. By...
-
