Motiracer38's latest activity
-
Motiracer38 replied to the thread V8 Solid Axle Ranger.That's a ton more clearance. Did you ever get the assist ram in there? -
Motiracer38 replied to the thread Sequoia Family Crawler.Looking through my notes, it's a 99-02 Chevy 2500HD with a bore of 37mm which is 1.45in It has 1/2-20 outlets that I put a Banjo bolt...
-
Motiracer38 replied to the thread Upcoming BLGT Meet 2025 OFFROAD EXPO OCT 4-5, OC FAIR GROUNDS...I was looking into motels down that way as well for me and the two younger boys for the whole weekend but school is throwing a wrench...
-
Motiracer38 replied to the thread 3D Print Chat.I tried printing ABS for the first time last weekend and it failed miserably. It was also old filament that had been sitting out for...
-
-
Motiracer38 replied to the thread 3D Print Chat.Bodj recently asked about printing PETG and I have struggled bigly for quite awhile before finally figuring it out. The biggest issue is...
-
-
Motiracer38 replied to the thread Sequoia Family Crawler.I pulled my hair out quite a bit over wet PETG. Report to the 3D printing thread and I'll explain more.
-
Motiracer38 replied to the thread Pissnoma.That's right, I forgot about the radius arms. Sounds like it'll work great until the bushing start to wear out.
-
Motiracer38 replied to the thread Rusty Red.My LS400 1UZ had two triggers that would add resistance and reduce voltage. I wired it to full kill and haven't noticed any difference...
-
Motiracer38 replied to the thread Sequoia Family Crawler.This was the second design and one hole is till off a bit but entirely usable. I used PETG same as. Switch panel used in the jeep for a...
-
Motiracer38 replied to the thread 1976 Ford F250 Crewcab Highboy build 76fordcrew.I loved seeing this truck racing NORRA, it looked like it handled the course well. The Manga paint job is neat, really sets apart the truck.
-
Motiracer38 replied to the thread Pissnoma.Good to see you getting some miles in and shaking it down. With that much shock up front mounted to the axle it will be an uphill battle...
-
Motiracer38 replied to the thread Sequoia Family Crawler.I did design the relocation assembly on CAD, hand cut everything and built it. Needed to clear the shock and convert to a 2500hd master...
-
Motiracer38 replied to the thread Sequoia Family Crawler.Well I made a valiant effort to take advantage of the 4 day weekend with no plans other than to finish this thing up. Came up a but...
-
-
Motiracer38 replied to the thread Found Item Passenger drop D60.The C's are symmetrical, even have steering stops on both sides. Caster, camber, balljoint angles are all the same. A RH knuckle will...
-
Motiracer38 replied to the thread High School 04 Ranger build (new update pics).That's a classic progression of a typical Ranger, love it! Solid parts with solid fabrication put together into a clean package should...
