Klever's latest activity
-
Small world! That guys name is Shane, i used to work with him at Giant Motorsports many years ago. I’m unsure of where he works now but... -
Now I had 4.86 rear gears done, I went out to the more race and truck worked awesome. Now I need to match the front gears. Installed...
-
Ok got rear 3rd all regeared with 4.86 gears. Rpm is much better for all around driving with the 35s. 0 noise. Just drained the...
-
Finished the rear end swap (SF 14bolt out of a 1500hd), got crossover steering done and all the stuff and things inbetween. New brake...
-
Back is almost all closed back in. Had a fuel leak so i stopped welding and fixed that. Should have the rear all closed in this evening.
-
Short notice since its this Saturday but anyone going or know anyone running Tuff trucks at the sam bernardino fair this weekend? Tuff...
-
Klever reacted to Pictafiedesign's post in the thread PICTAFIEDESIGN F150 Luxury Centermount Build with
Like.
Back from Arizona so we’re back on it getting it together. Chasing holes and got the rack and tierods in. Marked up what’s torqued and... -
Painted the swingers A close up of how I worked around the break booster and MC. I used a MC out of an explorer with the same...
-
radius i wasnt sure how to do... so i took some speaker insert MDF that i had bought and cut into quarters and glued together. Worked...
-
look like crap. you want to make me one.
-
small update, which some may have seen on IG. I built this center console, first time really ever trying to build something like this...
-
I was speaking with a friend who predominately restores E9/10 BMWs in the Los Angeles area and he asked if knew anyone who did vapor...
-
Klever reacted to Nick_presson_obs's post in the thread For Sale 88-98 obs silverado long travel kit with Like.
selling my Schumacher metal works long travel kit 3.5+" per side 17" travel upgraded billet tie rods fox 2.5x10 coilovers tuned by...
-
Coolers mounted and plumbed
-
Ended up running the coax under the seat and the power out of the floor board through an existing grommet. Didn’t have to drill a hole...
