Klever's latest activity
-
Decided to change things up a bit on the upper shock mounts and do a laser scan with the new Einstar 2 so I could CAD the mounts... -
Here's some of the sway bar setups and bumpstop locations/clearance I found
-
Alright, been a month since I started looking for answers regarding the sway bar and haven't come up with much. Made it out to the...
-
I didnt have one at first on that truck. And it never did anything wonky.. except roll over. LOL. But it has one now. Definitely run...
-
Thankfully if you're that articulated the suspension isn't usually moving fast, so bumping the shock like that isn't too bad (especially...
-
OK yea... like i said.. its less than you would think!!! I originally typed 20-30.... but then thought.. it's gotta be more than 20...
-
Still not sure on how much articulation this truck will ever see, edited the fuel cell carrier a bit and ended up with just over 6"...
-
Yes everything on the chassis is going to be custom. All that clears, the back of the fuel cell indents inboard to clear around the...
-
Probably going to start by taking 4" off overall on the cab side of the fuel cell carrier and see where that gets me. Not sure if the...
-
Allegedly
-
Well back in all fours and drove around the block, time to get some miles on it! Next step is going to be the rear end which should be...
-
Ahh shit, first oil change, out with old and in with the new. No more break in oil for this guy. Now we are ready to rev to the moon...
-
Better in Baja
-
That time again, Baja 1000 in two weeks. I’ll be at my usual spot in Erendira the week before the race. Just going to stay around that...
-
HELP! I need wire pins for the ford ECU! The vss wires were cut flush so the connector needs to be repinned with wires going to the new...
