Recent content by Gtscustoms

Sent a message to you. Got one i cans sell

Day 1 of testing went phenomenal. Did a hardware check once to the dirt. Ran the truck about 55 miles today and the valving in the shocks are incredible. Going to turn a few tubes on the rear tomorrow. Wanting to put about 100 miles on it this weekend. Realized today i need to have headsets as...

Haha! Yes about 8 weeks start to “semi finished” Finishing touches tomorrow and then leaving to hit Ridgecrest for testing this weekend. We are a part of the Borderline memorial so we will be doing that for the 11th.

The rear is on its own weight. Tomorrow is wrapping up assembly, and final wiring! Saturday testing! Then back to the shop to mount front fenders, install front Baja Designs and a front skid plate. Then on to the next MZSpec truck for a customer.

More photos!

Major photo dump for yall. I will post an update after testing this weekend with a full write up!

Photo DUMP!! Rear end housing from wicked creations as well as there rear hubs due to other vendors lagging. Rear links welded together, rear shock mounts, bump mounts, fuel cell cradle floor, battery trays, c pillar down tubes to the bavk half finished. We have the engine cage 80% done. Need to...

I chopped up the cab. Thought about moving it back but keeping a stock hood, stock style fenders. So i didnt want it to look proportionally off, especially with how much the back half shortens the trucks wheels base as is.

If you look very closely at the backhalf. I have not fully welded the tubes to the kicked frame rails yet. Im going to be pulling it off the frame rails to add all the tie ins to the Cage. I also need to finish up the C pillar in general so i can tie everything together. Appreciate your kind...

got some more major progress rolling on the “Tamale Trolly” my workers nick named the truck since it was a bit mexicano when we purchased it lol. Dash fitted in, b pillar finalized, got the MZ front kit installed along with MZ hubs, the MZspec backhalf 85% finished up. I will be assembling the...

Big update. Took been trying to knock out as much as possible on the build. Spent my day in traffic on Friday picking up all the parts for the build. I got the front end, the Mspec backhalf, as far as progress, we got the roof of the cage finish welded, put back in the truck, then got the A...

I would not mind you dialing this thing in once its a driver and i work out some bugs!

Got some decent progress this afternoon! Stuff is taking shape. My goal is to have this thing a roller by end of next week. If all goes to plan with having the MSpec backhalf start of next week. Thanks to Darren Parsons for the hook up on some 40s. This thing is gonna be fun. Does any one on...

Welp got some good progress today. Got the dash bar in and in position as well as the A pillar lower tubes down to the frame, modified the factory wiper system to use a single wiper for the whole windshield, utilizing the passenger side wiper i was able to change the geometry of the factory...

Cab cage process started this morning! Due to the timing of when i want this build ready for testing. I went ahead and purchased the MSpec backhalf kit from Chris which will be ready next week. Which will speed the process up majorly for me. Excited to share with yall the build process. My goal...