FasterNU's latest activity
-
FFasterNU replied to the thread Local Legend Project G4 AKA Quasi-Ghetto.Yea i think he said it was just his starting point for a new setup with motive gears in a higher ratio like mine.. (when discussing the...
-
FFasterNU replied to the thread Local Legend Project G4 AKA Quasi-Ghetto.i messed up the links. try now. haha. Def wont wear out if it is bluetooth!
-
FFasterNU replied to the thread Local Legend Project G4 AKA Quasi-Ghetto.OK, Here is .028. PS: Motive tech guy told me he starts with .030 on these gears...and goes from there. go figure.
-
FFasterNU replied to the thread PICTAFIEDESIGN F150 Luxury Centermount Build.Might be worth your time to make sure the set screws are at least tight? (I dont know how tight mine were from factory) I am going to...
-
FFasterNU replied to the thread PICTAFIEDESIGN F150 Luxury Centermount Build.Very niiice. DId you leave some room in between those switch pros? the face plate will take up some space around perimeter.... Oh...
-
FFasterNU replied to the thread Local Legend Project G4 AKA Quasi-Ghetto.So, looking at the motive gear paperwork.. they show the drive side to be closer to toe side. and the coast is centered. I feel like my...
-
FFasterNU replied to the thread Local Legend Project: Tur-BRO-yota.Got me going with LS3 and 69, and then switchBRO's made me climax!
-
FFasterNU replied to the thread Local Legend Project G4 AKA Quasi-Ghetto.^^ yea, I wonder if that means you are in the proper range... I read some like tighter backlash for offroad.. but I also read it can...
-
FFasterNU replied to the thread Local Legend Project G4 AKA Quasi-Ghetto.OK.. @Raceranger97 here is the .026. Have to admit.. I cant see a ton of difference between last and this one. *note too. Last two...
-
FFasterNU replied to the thread Local Legend Project G4 AKA Quasi-Ghetto.your wish is my command. LOL. Stay tuned.
-
FFasterNU replied to the thread Local Legend Project G4 AKA Quasi-Ghetto.OK... man, this certainly doesnt seem to match the "math" based on pinion face numbers...but I can see the pattern seems to be looking...
-
FFasterNU replied to the thread Local Legend Project G4 AKA Quasi-Ghetto.Annnd..... @Raceranger97 here is a .021 shim which puts the pinion .003 further out than the original. Drive: (2 pictures) Coast
-
FFasterNU replied to the thread Local Legend Project G4 AKA Quasi-Ghetto.OK.... Here is pattern from .016 shim Drive Coast
-
FFasterNU replied to the thread Local Legend Project G4 AKA Quasi-Ghetto.Well, shit.... guess I am going the wrong way. Wouldnt that move the drive even closer to the toe!?? Above is .018 of shims. I just...
-
FFasterNU replied to the thread Local Legend Project G4 AKA Quasi-Ghetto.@Raceranger97 So this is the first pattern. with backlash about .008. I feel like the drive side is maybe a little too deep and...