BROmanian's latest activity
-
BROmanian replied to the thread Project 69.Installed the doors and put it on the scales for its first weight in. Who wants to play guess the weight? -
-
BROmanian replied to the thread Project 69.Put fuel in it, answered some simple questions on the handheld, turned the key to on, fuel pumps came on, I checked for leaks (no leaks)...
-
-
BROmanian replied to the thread Project 69.Finally time for electrical, my fave. The Holley terminator computer and wiring harness is so easy that even a child could install it...
-
-
BROmanian replied to the thread Project 69.It's appreciated, I might add some more tubes like you did just in case. I have some more room for tubing up there and I need the weight.
-
BROmanian replied to the thread Project 69.You're not wrong, this was early in the build and I was figuring out tube placement. This area is completely different now with bunch of...
-
BROmanian replied to the thread Project 69.Yeah, looks like a mean spider. The track width is 93 inches so she is wide.
-
BROmanian replied to the thread Project 69.Now when the brakes are done, time for the dreaded radiator fan shroud. Ron Davis was trying to sell me the shroud for $600 and with the...
-
-
BROmanian replied to the thread Project 69.Now when the fuel system is done and coolant lines are made, it's time to start on the brake system. Purchased bunch of an3 fittings, 12...
-
-
BROmanian replied to the thread Project 69.Turboyota had these brackets laying around so I used them. They are 1.75 dia tube that he put a groove in on the lathe for the hose...
-
-
BROmanian replied to the thread Project 69.After rolling the tube ends I was able to make the lines and install them. I tacked them on the car removed them and welded them. Before...
-
-
BROmanian replied to the thread Project 69.Bought this tube bead roller of Amazon so that I could roll the ends of my coolant lines. Works like a charm and super easy to use.
-
-
BROmanian replied to the thread Project 69.Put the body back on for the 666th time so that I could finally install the roof lights. Installed the suspension just so that I could...
-
-
BROmanian replied to the thread Project 69.Made some more panels, this time closing out the back of the cab. These are easily removable even with the seats installed so that I can...
-
-
BROmanian replied to the thread Project 69.Went on to making the rear engine panels and the front close out panels. The rears were easy since they are flat but the front were a...
-
-
BROmanian replied to the thread Project 69.The joy of preparing the Dzus fasteners. Got this pneumatic rivet gun on Amazon, worth every penny.
-
