BROmanian's latest activity

  • BROmanian
    BROmanian replied to the thread Project 69.
    Made some more panels, this time closing out the back of the cab. These are easily removable even with the seats installed so that I can...
    • IMG_7825.jpeg
  • BROmanian
    BROmanian replied to the thread Project 69.
    Went on to making the rear engine panels and the front close out panels. The rears were easy since they are flat but the front were a...
    • IMG_7756.JPG
    • IMG_7890.JPG
    • IMG_7891.JPG
    • IMG_7971.JPG
  • BROmanian
    BROmanian replied to the thread Project 69.
    The joy of preparing the Dzus fasteners. Got this pneumatic rivet gun on Amazon, worth every penny.
    • IMG_7889.JPG
  • BROmanian
    BROmanian replied to the thread Project 69.
    Started running the fuel lines. Amazon to the rescue here, super easy to work with and you can make it as custom as you want it. I just...
    • IMG_7609.JPG
    • IMG_7615.JPG
  • BROmanian
    BROmanian replied to the thread Project 69.
    How about now biatch? Turboyota: I like it Me: I live to serve He might haver been right but we are not going to tell him that. Also...
    • IMG_8024.JPG
    • IMG_8026.JPG
  • BROmanian
    BROmanian replied to the thread Project 69.
    Made this beautiful dash. Turboyota: I hate it looks shitty. Me: What the fuck, it looks great. Turboyota: It needs to be more swoopy...
    • IMG_7982.JPG
    • IMG_7981.JPG
  • BROmanian
    BROmanian replied to the thread Project 69.
    Decided that the top is also getting closed up so I made these plates and welded them in.
    • IMG_7603.JPG
    • IMG_7604.JPG
  • BROmanian
    BROmanian replied to the thread Project 69.
    Some glamour shots of the progress.
    • IMG_7459.JPG
    • IMG_7460.JPG
  • BROmanian
    BROmanian replied to the thread Project 69.
    Had this material laying around so we decided to use it as a firewall or as I would like to call it bullet proofing the front of the car.
    • IMG_7473.JPG
  • BROmanian
    BROmanian replied to the thread Project 69.
    Decided to make a skid plate for the front. I was able to bump form it on the press, not to shabby.
    • IMG_7417.JPG
    • IMG_7415.JPG
    • IMG_7414.JPG
  • BROmanian
    BROmanian replied to the thread Project 69.
    It's time to work on the engine before it goes in the frame for the last time (lies). Since I'm rotating the intake from factory I...
    • IMG_7454.jpeg
    • IMG_7453.jpeg
    • IMG_7452.jpeg
    • IMG_7451.jpeg
    • IMG_7449.jpeg
    • IMG_7455.jpeg
  • BROmanian
    BROmanian replied to the thread Project 69.
    Designed this super intricate (not) fuel tank made out of 1/8 5052 aluminum, cut it on the laser and bent it on the bender. Lots of...
    • IMG_7422.jpeg
    • IMG_7421.jpeg
    • IMG_7420.jpeg
    • IMG_7412.jpeg
    • IMG_7411.jpeg
    • IMG_7410.jpeg
  • BROmanian
    BROmanian replied to the thread Project 69.
    Time to move on to the fuel tank. Got this fuel pump setup from Radium. I chose it because it has 2 pumps, one lift pump and the second...
    • IMG_7125.jpeg
    • IMG_7138.jpeg
    • IMG_7139.jpeg
  • BROmanian
    BROmanian replied to the thread Project 69.
    Installed the pedals in the correct location this time so that I could place the throttle pedal. Also installed the seats, forgot to...
    • IMG_7386.jpeg
    • IMG_7385.jpeg
    • IMG_7384.jpeg
  • BROmanian
    BROmanian replied to the thread Project 69.
    Since I apparently have motivation to do sheet metal work I need to take advantage of the situation. Started making the inner floor...
    • IMG_7383.jpeg
    • IMG_7334.jpeg
    • IMG_7333.jpeg
    • IMG_7332.jpeg
    • IMG_7303.jpeg
    • IMG_7302.jpeg
    • IMG_8428.JPG
Show older items
Back
Top