BROmanian's latest activity

  • BROmanian
    BROmanian replied to the thread Project 69.
    So I got the Home Depot tape out once again and found center line, best I could I was probably drunk. Drew some fancy lines with the...
    • IMG_3690.jpeg
    • IMG_3691.jpeg
    • IMG_3692.jpeg
    • IMG_3693.jpeg
    • IMG_3694.jpeg
  • BROmanian
    BROmanian replied to the thread Project 69.
    It was time to test fit the fiberglass bonnet (that hood in the queens English) so I temp installed the front suspension and it hits...
    • IMG_3689.jpeg
    • IMG_3688.jpeg
    • IMG_3687.jpeg
    • IMG_3685.jpeg
    • IMG_3603.jpeg
    • IMG_3601.jpeg
  • BROmanian
    BROmanian replied to the thread Project 69.
    Made a bracket for the pedal assembly and tacked into place. Noticed that the clutch is a bit close to the tube and it might interfere...
    • IMG_3519.jpeg
    • IMG_3520.jpeg
  • BROmanian
    BROmanian replied to the thread Project 69.
    Moving back to the front while I wait for my bypasses to show up. Finished some of the front tubes and was able to do some more CAD work...
    • IMG_3515.jpeg
    • IMG_3516.jpeg
    • IMG_3517.jpeg
    • IMG_3518.jpeg
  • BROmanian
    BROmanian replied to the thread Project 69.
    This fucking guy, all I need you to do is to hold it there for me, I'm trying to take progress pictures. Temp mounted the coilovers...
    • IMG_3507.jpeg
    • IMG_3508.jpeg
    • IMG_3509.jpeg
  • BROmanian
    BROmanian replied to the thread Project 69.
    Playing around with the idea of making it a 3 seater and center steer. Pretty cool idea, until you have people sitting in there with you...
    • IMG_3504.jpeg
    • IMG_3505.jpeg
  • BROmanian
    BROmanian replied to the thread Project 69.
    More CAD work, this time I graduated to Home Depot masking tape.
    • IMG_3488.jpeg
    • IMG_3489.jpeg
  • BROmanian
    BROmanian replied to the thread Project 69.
    New home, we had to let them meet outside first so that they could get used to each other. I can already tell that I'm going to be sooo...
    • IMG_3442.jpeg
  • BROmanian
    BROmanian replied to the thread Project 69.
    Well, got a new job and moving into a smaller place in a different city. Project 69 can't doesn't fit in the new house so I sweet talked...
  • BROmanian
    BROmanian replied to the thread Project 69.
    My driveway mounted tube bending operation definitely get some looks and upsets the HOA.
    • IMG_2696.jpeg
    • IMG_2697.jpeg
  • BROmanian
    BROmanian replied to the thread Project 69.
    Having everything laser cut is definitely the way to go. Fits together like Legos
    • IMG_2010.jpeg
    • IMG_1979.jpeg
    • IMG_1978.jpeg
  • BROmanian
    BROmanian replied to the thread Project 69.
    Yes, I just made a new chassis, the old one was too much work. I only used the 2 center tubes.
  • BROmanian
    BROmanian replied to the thread Project 69.
    I knew better, but I was just tacking, its fine.
  • BROmanian
    BROmanian replied to the thread Project 69.
    I highly recommend to run the ground cable through your Heim joints when you're welding, that way it completely fucks your brand new $80...
    • IMG_2032.jpeg
  • BROmanian
    BROmanian replied to the thread Project 69.
    Started on the steering, the HAAS is just magical for these kind of projects.
    • IMG_1767.jpeg
    • IMG_1770.jpeg
    • IMG_1980.jpeg
Show older items
Back
Top