BROmanian's latest activity

  • BROmanian
    BROmanian replied to the thread Project 69.
    Well, got a new job and moving into a smaller place in a different city. Project 69 can't doesn't fit in the new house so I sweet talked...
  • BROmanian
    BROmanian replied to the thread Project 69.
    My driveway mounted tube bending operation definitely get some looks and upsets the HOA.
    • IMG_2696.jpeg
    • IMG_2697.jpeg
  • BROmanian
    BROmanian replied to the thread Project 69.
    Having everything laser cut is definitely the way to go. Fits together like Legos
    • IMG_1978.jpeg
    • IMG_1979.jpeg
    • IMG_2010.jpeg
  • BROmanian
    BROmanian replied to the thread Project 69.
    Yes, I just made a new chassis, the old one was too much work. I only used the 2 center tubes.
  • BROmanian
    BROmanian replied to the thread Project 69.
    I knew better, but I was just tacking, its fine.
  • BROmanian
    BROmanian replied to the thread Project 69.
    I highly recommend to run the ground cable through your Heim joints when you're welding, that way it completely fucks your brand new $80...
    • IMG_2032.jpeg
  • BROmanian
    BROmanian replied to the thread Project 69.
    Started on the steering, the HAAS is just magical for these kind of projects.
    • IMG_1980.jpeg
    • IMG_1770.jpeg
    • IMG_1767.jpeg
  • BROmanian
    BROmanian replied to the thread Project 69.
    Once I was done with the CAD design it was time to make a template for the main tubes. Holy shit, this roof has 2 different diameter...
    • IMG_2345.jpeg
    • IMG_2346.jpeg
    • IMG_2347.jpeg
    • IMG_2348.jpeg
  • BROmanian
    BROmanian replied to the thread Project 69.
    The body is attached to the frame and the bulkhead is set at 7 degrees. Fits pretty good
    • IMG_2293.jpeg
    • IMG_2294.jpeg
  • BROmanian
    BROmanian replied to the thread Project 69.
    Pretty proud of this CAD design for the roll cage, I mean even the King suspension is on there.
    • IMG_2178.jpeg
    • IMG_2179.jpeg
  • BROmanian
    BROmanian replied to the thread Project 69.
    Built this sweet, super safe, made out of leftover fence material that I had laying around cradle. Flipped it over and now I can build...
    • IMG_2058.jpeg
    • IMG_2061.jpeg
    • IMG_2062.jpeg
  • BROmanian
    BROmanian replied to the thread Project 69.
    Started with cleaning up the pan to fit the tube chassis. This Harbor Freight air hammer does wonders on the spot welds. Those...
    • IMG_1037.jpeg
    • IMG_0969.jpeg
    • IMG_0967.jpeg
    • IMG_0966.jpeg
    • IMG_0965.jpeg
  • BROmanian
    BROmanian replied to the thread Project 69.
    Put the pan on it and yes, you guessed it, more cutting. At this point I should have just started from scratch. Oh well
    • IMG_0751.jpeg
    • IMG_0750.jpeg
  • BROmanian
    BROmanian replied to the thread Project 69.
    First official wheelie
    • IMG_0749.jpeg
    • IMG_0748.jpeg
  • BROmanian
    BROmanian replied to the thread Project 69.
    Christmas arrived early, got the shipment from Gear one, look at those 6 piston calipers.
    • IMG_0744.jpeg
    • IMG_0745.jpeg
    • IMG_0746.jpeg
Show older items
Back
Top