Banging_limiter's latest activity
-
Banging_limiter replied to the thread 1980 toyota pick up new build.Wheel base is around 120” for anyone wondering. I’ll measure and post frame and belly height tonight. -
Banging_limiter replied to the thread 1980 toyota pick up new build.Built some shock hoops and got it on its own weight it is taller then I liked but it’s pretty long so I think it should be fine. I had...
-
-
Banging_limiter replied to the thread 1980 toyota pick up new build.Frames plated steering box is mounted I’ve pretty much finish welded anything the list is getting shorter hope to wheel it soon! Also...
-
-
Banging_limiter replied to the thread 1980 toyota pick up new build.Thanks dude! 🍻
-
Banging_limiter replied to the thread 1980 toyota pick up new build.Been slacking on updates but I got the floor pretty much all tuned out still have to mount seats and sheet it in. But it’s coming along...
-
-
Banging_limiter replied to the thread 1980 toyota pick up new build.Got some stuff done over the weekend I built sliders and cut the rockers out of the cab and welded the cab to the sliders and tied it...
-
-
Banging_limiter replied to the thread 1980 toyota pick up new build.It also is gonna depend on what springs you’re gonna run if they are brand new the shackle angle might be a little bad at first but will...
-
Banging_limiter replied to the thread 1980 toyota pick up new build.That photo the frame is on jack stands axle is at full droop with weight the angle is correct. 🍻
-
Banging_limiter replied to the thread 1980 toyota pick up new build.Well the project is snowballing after seeing how bad the floor is I’m making the decision to cut the whole thing out this weekend. I...
-
Banging_limiter replied to the thread 1980 toyota pick up new build.Ended up starting on the crossmember and making sure the seats were gonna fit, I’d say they’re just about the perfect size 🍻 gonna...
-
-
Banging_limiter replied to the thread 1980 toyota pick up new build.Cut most of the tunnel and got the trans mated to the engine I don’t really want to deal with lifting the engine more so I guess it...
-
-
Banging_limiter replied to the thread 1980 toyota pick up new build.Engine in and front axle is mocked up need to get the trans in too and set it on its own weight before I burn it all in make sure the...
-
-
Banging_limiter replied to the thread 1980 toyota pick up new build.If I can get these springs to work I’ll have a sweet departure angle after bobbing the bed just like I wanted I seen a lot of samurai’s...
-
-
Banging_limiter replied to the thread 1980 toyota pick up new build.Didn’t get anything done today really but I did build the rear spring packs and hung the rear axle in place I had some problems with...
-
-
Banging_limiter replied to the thread 1980 toyota pick up new build.Got all the ifs junk cut off and the rear axle pulled all the dash and wiring ripped out going to mount the front and rear axles...
-
