Baconcreekmetal's latest activity
-
BOverall the explorer wast in great condition, paint needs a wax, tires were nearly new, interior was clean, but needed a headliner. Got...
-
BWhat’s up! Decided to start a thread on my explorer build. I’ve had a few toys over the years and most of them on the cheap side so this...
-
BSponsorship requires the mention of fourloco in every build update
-
BShe's coming back together! Just got to fill the cage back in and build the cradle for the fuel tank and she's good to go. And extend...
-
BUpon closer inspection when rebuilding the back half I've noticed the rear Axel may be a little bent. 🤔
-
BStarted rebuilding the back half. Moved the bronco 2 fuel tank behind the Axel
-
BYeah sounds like you got 63" chevy leafs that are 2-1/2" wide. I ran same leafs on my first toyota i build in high school. Added a...
-
BI can't remember the date range but it was from the 80's or early 90's. If you use the main leaf from those trucks, you can get it from...
-
BIt was an 87 e250 Econoline. The beans are not equal length like the f100 beams. But they have bigger brakes and bearings. It had the...
-
BSome shots from the last race we were at. Got first in class! We had 4 trucks from our Southeast Pre-Runners crew out there! Hopefully...
-
BFast forward over the years... upgrading to a three-link, and a V8, and several changes in the front and rear cage design, hydro bumps...
-
BFrom the time she rolled to the time I drove around the block was right about 2 years
-
BShut her down on her own feet and took her around the block. Then took the kid with me, she was not impressed. Then a couple days later...
-
BBuilt some equal length beams. bought a weld it yourself swinger set for equal length steering from Baker Motorsports. Built a janky ass...
-
BStarted building the cage right before we were hit by a hurricane And I got some shocks and parts off of turd bro Yoda and some other...
