Austen2019's latest activity
-
AAusten2019 replied to the thread Looking for 3.75 coils.Update I need 350 and 250lb coils anyone holding out
-
AAusten2019 replied to the thread For Sale 2006 Toyota Tundra SR5.just hardly see ppl using 2.5s now everything is 2.5 3.0 or 3.0 I would do what 4xfoor says wait for the right buyer someone is going to...
-
AAusten2019 replied to the thread Ttb ball joint moving HELP.There all torques properly my driver side didn’t move but three of the tabs are broken some how
-
AAusten2019 replied to the thread For Sale 2006 Toyota Tundra SR5.It’s an awesome truck just think ppl aren’t really buying right now and 25k it does have a stock rear end and only 2.5 shocks.
-
AHey guys so I have 4.5 over ttb on my bronco I put new ball joints in for the spindle and got it professionally aligned but after my...
-
-
AAusten2019 replied to the thread Trade 2.5 12 fox coilovers trade.I’m sorry these are gone
-
AHave a set of 3.0 kuster 14 in coilovers with a 500 lower spring they were rebuilt but leak out of the seal cap. Internals are in good...
-
-
AAusten2019 replied to the thread PILE oh shit bronco 86.They sure do but the rod ends are both cracked so will need to be replaced sooner than later
-
AAusten2019 reacted to Tree trunk's post in the thread SXS or Prerunner. Your thoughts and what you choose. with
Like.
bro hoe’s like pre-runners Not side by sides Case closed…… -
AAusten2019 replied to the thread SXS or Prerunner. Your thoughts and what you choose..Sxs are cool don’t get me wrong and they are fun as hell to drive but every time I get in one I’m freezing my ass off or sucking in dust...
-
AAusten2019 replied to the thread PILE oh shit bronco 86.after cleaning and looking over the bronco after 270 off-road miles I found my trans mount blew out I thought I heard a loud noise on...
-
-
AAusten2019 replied to the thread PILE oh shit bronco 86.So I have had a couple ppl ask me about my steering. On the 280 mile trip I never felt a jerk in the steering wheel didn’t feel bump...
-
-
AAusten2019 replied to the thread PILE oh shit bronco 86.Let’s put it this way it was like driving around with 200 psi in the tires
-
AAusten2019 replied to the thread Bronco Metal Inner Fender Removal.I cut my fenders about 4in up it does make the outer fender pretty Flimsy though may need to support it.
-
AI need 22in 400lb and a 12in 300lb spring for my 3.0 14in coilovers I hope I’m posting this in the right area Thanks
