36Fan's latest activity
-
336Fan replied to the thread F250 crew cab build.Pressure test the system to be sure. The fact that Steve was noticing temps he didn't like might indicate weak head gaskets etc. Change...
-
3I could be way off. Too lazy to go check. Edit - curiosity got the best of me and you were correct. Was mixed up with GAWR.
-
336Fan replied to the thread F250 crew cab build.That thing weighs 11k?
-
336Fan reacted to 2012SVTSC's post in the thread Is there such thing as a 1.25 Heim joint with a 3/4-inch bolt hole? with
Like.
Copy, understood. I probably didn't type it out great but we are seeing that in the cad, the rod end body contacting the sides of the... -
336Fan reacted to 2012SVTSC's post in the thread Is there such thing as a 1.25 Heim joint with a 3/4-inch bolt hole? with Like.
Thanks everyone. For now, the plan is to run the sleeves since they’re free and we already have all the parts cut from the DIY Off-Road...
-
336Fan replied to the thread Is there such thing as a 1.25 Heim joint with a 3/4-inch bolt hole?.The ones linked above are the ones I use, but as I mentioned the heim gets close to the brackets when cycling. Has nothing to do with...
-
336Fan replied to the thread Is there such thing as a 1.25 Heim joint with a 3/4-inch bolt hole?.1-7/8 stack height with a 3/4 bolt, 1.250 heim. I dont see how it could be any narrower than this, it gets very close when cycling the...
-
336Fan replied to the thread 88’ Raingutter Ranger.Stock block location, mid plate and trans tail mount?
-
336Fan replied to the thread 88’ Raingutter Ranger.What mounts are you using?
-
336Fan replied to the thread Is there such thing as a 1.25 Heim joint with a 3/4-inch bolt hole?.My beam mounts are fairly narrow and it gets really close on the inside when it cycles. I'll try and get some measurements tmrw for you.
-
336Fan replied to the thread 88’ Raingutter Ranger.Do you plan on running a front engine plate?
-
3Looking for a complete Dana 50 TTB front axle assembly, prefer 4:10 ratio.
-
336Fan replied to the thread Wanted: 96-97 F250 CC Short bed.Found. Close the door.
-
3RATR 2025 Drive to Laughlin from NorCal and first went to Vegas to visit family. 600 miles ones way. Truck drives great but noisy as all...
-
3Looking for a 4wd or 2wd diesel crew cab short bed. Will travel for the right truck, ready to buy now.